13 XENYX 1204FX/1204 User Manual
EQ stereo channels
Low 80 Hz / ±15 dB
Mid 2.5 kHz / ±15 dB
High 12 kHz / ±15 dB
Aux sends
Type ¼" TS connector, unbalanced
Impedance approx. 120 Ω
Max. output level +22 dBu
Stereo aux returns
Type ¼" TRS connector, electronically balanced
Impedance approx. 20 kΩ bal. / 10 kΩ unbalanced
Max. input level +22 dBu
Main outputs
Type XLR, electronically balanced
Impedance approx. 240 Ω bal. / 120 Ω unbalanced
Max. output level +28 dBu
Control room outputs
Type ¼" TS connector, unbalanced
Impedance approx. 120 Ω
Max. output level +22 dBu
Headphones output
Type ¼" TRS connector, unbalanced
Max. output level +19 dBu / 150 Ω (+25 dBm)
DSP 24-bit Texas Instruments
Converter 24-bit Sigma-Delta,
64/128-times oversampling
Sampling rate 40 kHz
Main Mix System Data
2
Noise
Main mix @ -∞, -105 dB / -108 dB A-weighted
Channel fader -∞
Main mix @ 0 dB, -95 dB / -97 dB A-weighted
Channel fader -∞
Main Mix @ 0 dB, -82,5 dB / -85 dB A-weighted
Channel fader @ 0 dB
Power supply
Mains voltage 100 - 240 V~, 50/60 Hz
Power consumption 40 W
Fuse 100 - 240 V~: T 1.6 A H 250 V
Mains connection Standard IEC receptacle
Physical
1204FX
Dimensions (H x W x D) approx. 3 / x 9 / x 13 /"
approx. 97 x 247 x 334 mm
Weight (net) approx. 5 ¾ lbs / 2.60 kg
1204
Dimensions (H x W x D) approx. 3 / x 9 / x 13"
approx. 97 x 247 x 328 mm
Weight (net) approx. 5 / lbs / 2.56 kg
Measuring conditions:
1: 1 kHz rel. to 0 dBu; 20 Hz - 20 kHz; line input; main output; unity gain.
2: 20 Hz - 20kHz; measured at main output. Channels 1 - 4 unity gain; EQ flat; all channels on main mix;
channels 1/3 as far left as possible, channels 2/4 as far right as possible. Reference = +6 dBu.
BEHRINGER is constantly striving to manintain the highest professional standards. As a result of these efforts,
modifications may be made from time to time to existing products without prior notice. Specifications and
appearance may differ from those listed or illustrated.
To Next Page
Loading...
