Need help?Do you have a question about the Behringer 1002 and is the answer not in the manual?
General| Type | Analog Mixer |
|---|---|
| Channels | 10 |
| Mic Preamps | 2 |
| Line Inputs | 8 |
| EQ Bands | 3-band |
| Phantom Power | Yes |
| Aux Sends | 1 |
| Inputs - Mic Preamps | 2 x XLR |
| Inputs - Line | 8 |
| Headphone Output | 1 x 1/4" |
| Power Supply | External |
Essential safety guidelines for operation, maintenance, and electrical precautions to prevent hazards.
Explains the three main functions of a mixing console: signal processing, distribution, and mixing.
Details how the manual is structured to help users understand controls and their interconnections.
Covers essential steps before operation: shipment inspection, initial setup, and online registration.
Alerts users to potential hearing damage from extreme volumes and advises on setting safe levels.
Provides crucial advice on installation, including placement, ventilation, and signal interference avoidance.
Details controls and connectors for mono input channels: MIC/LINE inputs, EQ, and FX/PAN/LEVEL controls.
Describes MIC inputs with phantom power and switchable LINE inputs, including gain adjustment (TRIM).
Explains the 3-band equalizer for mono channels, focusing on its warm, musical sound character.
Covers FX sends for effects, PAN for stereo positioning, and LEVEL for main mix volume control.
Details stereo channel features: line inputs, 3-band EQ, and FX/BALANCE/LEVEL controls.
Explains stereo line inputs, including mono operation and sensitivity switch (+4 dBu/-10 dBV).
Describes the 3-band EQ for stereo channels, noting its preference for stereo signals.
Covers stereo FX sends, BALANCE control for signal relative levels, and LEVEL for main mix.
Details main section connectors: FX/AUX sends, STEREO AUX RETURNS, and MONITOR/MAIN MIX outputs.
Explains routing signals to external effects devices via FX SEND and returning them via STEREO AUX RETURNS.
Describes the PHONES/CONTROL ROOM and MAIN OUT connectors for monitoring and main audio output.
Details CD/TAPE INPUTS for external sources and CD/TAPE OUTPUTS for main mix signal.
Explains the TAPE TO MIX, TAPE TO CTRL ROOM, and FX TO CTRL ROOM switches for signal routing.
Describes +48 V Phantom Power activation, CLIP indicator, POWER LED, and 4-segment level display.
Instructions for connecting the power supply unit, safety notes on power connection order and heat.
Guides on wiring audio connectors (XLR, 1/4" TS/TRS) and using appropriate cables for connections.
Clarifies how statutory rights and national laws interact with the provided warranty terms.
Encourages prompt online registration for efficient processing of repair claims and warranty service.
Details the one-year warranty on mechanical/electronic components and BEHRINGER's repair/replacement options.
Outlines the process for obtaining warranty service, requiring a return authorization number before shipment.
Lists conditions not covered by warranty, including misuse, unauthorized service, and wear and tear.
States that the warranty is exclusively for the original buyer and is not transferable to subsequent owners.
Defines liability limits and buyer's recourse in case of failure to provide proper warranty service.
To Next Page