Need help?Do you have a question about the Behringer XENYX 1832FX and is the answer not in the manual?
General| Type | Analog |
|---|---|
| Channels | 18 |
| Microphone Preamps | 8 |
| Inputs - Mic Preamps | 8 |
| EQ Bands | 3-band |
| Effects Processor | Yes |
| Effects | 24-bit Digital Effects |
| Phantom Power | Yes |
| USB Interface | No |
| Inputs - Other | 2 |
| Outputs - Main | 2 (stereo) |
| Headphone Output | 1 |
| Main Outputs | XLR |
| Tape Inputs | 1 (stereo) |
| Tape Outputs | 1 (stereo) |
Crucial cautionary notices on electrical shock, fire hazards, and proper handling procedures.
Describes microphone and line inputs, including XLR, phantom power, and balanced/unbalanced jacks.
Explains aux send controls, pre-fader/post-fader operation, and the FX send for the internal effects processor.
Details routing switches, PAN, MUTE, SOLO functions, and the channel fader for mono channels.
Describes stereo channel inputs, LEVEL switch, LOW CUT, MIC TRIM, and the stereo EQ section.
Describes the BALANCE control, routing switches, MUTE, SOLO, and channel fader for stereo channels.
Details MON control, master AUX SEND controls, and the FX control in the main section.
Explains using FBQ Feedback Detection with the graphic equalizer to avoid feedback.
Details voltage supply, phantom power switch, and fuse holder/IEC mains receptacle.
Explains power switch operation, phantom power precautions, and microphone connection safety.
To Next Page