Behringer XENYX 1002B User Manual

ENGLISH
User Manual
This manual is available in English, German, Spanish and
Chinese. Download them by going to the appropriate product
page at:
www.behringer.com
XENYX 1002B
Ultra low-noise design,
10-input, 2-bus mic/line mixer
with optional battery
operation
Thank you
Thank you for choosing the XENYX 1002B 10 input mixer. This mixer
is packed with features like ultra low-noise XENYX mic preamps,
neo-classic “British” 3-band EQs, and stereo channels that allow
simultaneous mic and line input use, as well as both monitor and
FX sends on each channel. The 1002B can also operate on battery
power, a unique feature that allows you to record or perform on
the go or outdoors. The 1002B delivers everything you expect
from a powerful, small-format mixer. From broadcasting and video
dubbing to full band performance and recording, this versatile
piece of gear works wonders in a variety of applications.
Table of Contents
Thank you ..................................................................... 1
Important Safety Instructions ................................... 2
1. Before You Get Started ........................................... 3
2. Audio Connections ................................................. 4
3. Controls and Connectors ...................................... 5
4. Gain Setting ............................................................. 6
5. Applications ............................................................ 8
6. Specifications .......................................................... 9
Limited waranty ......................................................... 11
Legal Disclaimer ........................................................ 12

Behringer XENYX 1002B Specifications

General

Frequency range	10 - 200000 Hz
Channels quantity	10 channels
Digital sound processing	- bit
Line Signal-to-Noise Ratio (SNR)	120 dB
DJ mixer	-
Headphone out	Yes
Product color	Black

Weight and Dimensions

Depth	216 mm
Width	298 mm
Height	73 mm
Weight	2770 g

Summary

Getting Started

Shipment and Handling

Examine packaging for transit damage and recommended handling procedures.

Online Product Registration

Register your equipment online for warranty service and support.

Basic Operation Guide

Step-by-step instructions for connecting and powering on the mixer.

Audio Connection Types

XLR Balanced Connections

Connect microphones and line-level sources using balanced XLR cables.

Unbalanced TS Connections

Connect unbalanced mono sources using 1/4" TS cables.

Balanced TRS Connections

Connect balanced stereo sources or inserts using 1/4" TRS cables.

Insert Send/Return Connections

Utilize insert jacks for connecting external processors like compressors or gates.

Controls and Connectors Overview

Front Panel Controls

Detailed description of all knobs, faders, jacks, and indicators on the front panel.

Rear Panel Connectors

Identification and function of connectors on the rear panel.

Gain Setting Procedures

Using External Effects

Route channel signals to external effects processors and return them to the mix.

Creating a Monitor Mix

Set up a separate monitor mix using the MON SEND for performers.

Battery Installation

Instructions for installing and powering the mixer using 9V batteries.

Product Applications

Technical Specifications

Limited Warranty Information

Warranty Exclusions

Covers parts not included in warranty and conditions that void the warranty.

Warranty Transferability

Details on whether the limited warranty can be transferred to subsequent owners.

Legal Disclaimer

Federal Communications Commission Compliance