Behringer XENYX 1002B User Manual

ENGLISH
XENYX 1002B User Manual
2
Important Safety Instructions
*
Terminals marked with this symbol carry electrical current of
suffi cient magnitude to constitute risk of electric shock. Use
only high-quality commercially-available speaker cables with ¼" TS
plugs pre-installed. All other installation or modifi cation should be
performed only by qualifi ed personnel.
*
This symbol, wherever it appears, alerts you to the presence of
uninsulated dangerous voltage inside the enclosure - voltage that
may be suffi cient to constitute a risk of shock.
!
This symbol, wherever it appears, alerts you to important operating
and maintenance instructions in the accompanying literature.
Please read the manual.
Caution !
To reduce the risk of electric shock, do not remove the top cover
(or the rear section). No user serviceable parts inside. Refer servicing
to qualifi ed personnel.
Caution !
To reduce the risk of fi re or electric shock, do not expose this
appliance to rain and moisture. The apparatus shall not be exposed
to dripping or splashing liquids and no objects fi lled with liquids,
such as vases, shall be placed on the apparatus.
Caution !
These service instructions are for use by qualifi ed service personnel
only. To reduce the risk of electric shock do not perform any
servicing other than that contained in the operation instructions.
Repairs have to be performed by qualifi ed service personnel.
Read these instructions.
[1]�
Keep these instructions.[2]�
Heed all warnings.[3]�
Follow all instructions.[4]�
Do not use this apparatus near water.[5]�
Clean only with dry cloth.[6]�
Do not block any ventilation openings. Install in accordance [7]�
with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat
[8]�
registers, stoves, or other apparatus (including amplifi ers) that
produce heat.
Do not defeat the safety purpose of the polarized or
[9]�
grounding- type plug. A polarized plug has two blades with one
wider than the other. A grounding-type plug has two blades
and a third grounding prong. The wide blade or the third prong
are provided for your safety. If the provided plug does not fi t
into your outlet, consult an electrician for replacement of the
obsolete outlet.
Place the power cord so that it is protected from being walked
{10}�
on and sharp edges. Be sure that the power cord is protected
particularly at plugs, convenience receptacles and the point
where it exits from the apparatus.
The apparatus shall be connected to a MAINS socket outlet
{11}�
with a protective earthing connection.
Where the MAINS plug or an appliance coupler is used as
{12}�
the disconnect device, the disconnect device shall remain
readily operable.
Only use attachments/accessories specifi ed by the
{13}�
manufacturer.
Use only with the cart, stand, tripod, bracket,
{14}�
or table specifi ed by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Unplug this apparatus during lightning
{15}�
storms or when unused for long periods of time.
Refer all servicing to qualifi ed service personnel. Servicing is
{16}�
required when the apparatus has been damaged in any way,
such as power supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
EN

Behringer XENYX 1002B Specifications

General

Frequency range	10 - 200000 Hz
Channels quantity	10 channels
Digital sound processing	- bit
Line Signal-to-Noise Ratio (SNR)	120 dB
DJ mixer	-
Headphone out	Yes
Product color	Black

Weight and Dimensions

Depth	216 mm
Width	298 mm
Height	73 mm
Weight	2770 g