Need help?Do you have a question about the Behringer XENYX X1222USB and is the answer not in the manual?
General| Type | Analog |
|---|---|
| Channels | 16 |
| Phantom Power | Yes |
| Inputs - Line | 8 |
| Faders | 60mm |
| USB | Yes |
| Tape Input/Output | Yes |
| Mic Preamps | 4 XENYX Mic Preamps |
| EQ | 3-band |
| Effects | Yes |
| Aux Sends | 2 |
| Headphone Output | 1/4" TRS |
Integrated graphic EQ system to identify and eliminate feedback frequencies using LEDs.
Details the built-in 24-bit A/D and D/A converter effects processor with 16 presets.
Describes the three main functions of a mixing console: signal processing, level setting, and signal distribution.
Details the controls for mono channels, including GAIN, LEVEL SET, COMPRESSOR, and EQ.
Explains the 3-band EQ on mono channels, including shelving and peak filters.
Describes the MON and FX aux send controls for routing signals to monitors or effects.
Details the PAN, MUTE switch, MUTE LED, CLIP LED, and channel fader functions.
Details the controls for stereo channels, including inputs, EQ, aux sends, and balance.
Explains the line-level and microphone inputs for stereo channels.
Describes the stereo equalizer for stereo channels, matching mono channel EQ.
Explains how aux sends function for stereo channels, summing to mono.
Details the BAL control, MUTE switch, MUTE LED, CLIP LED, and channel fader for stereo channels.
Covers the main section controls, including monitor/FX sends and other connectors.
Details the main section controls for MON SEND and FX SEND.
Covers the main mix fader, main output connectors, and headphone connector.
Details the USB connectivity for sending/receiving stereo audio to/from a computer.
Details the built-in 24-bit multi-effects processor, its presets, and signal mixing.
Lists detailed specifications for microphone and line inputs on mono channels.
Lists specifications for the main XLR outputs.
To Next Page
