To Next PageTo Next Page
Need help?Do you have a question about the Behringer XENYX X1204USB and is the answer not in the manual?
General| Type | Analog |
|---|---|
| Channels | 12 |
| Mic Preamps | 4 |
| Phantom Power | Yes |
| EQ Bands | 3-band |
| Aux Sends | 2 |
| Headphone Output | 1 x 1/4" |
| Tape Input/Output | Yes |
| Inputs - Other | 4 XLR |
| Outputs - Main | 2 x XLR, 2 x 1/4" |
| Outputs - Other | 2 x 1/4" (Control Room) |
| Main Outputs | 2 x XLR, 2 x 1/4" TRS |
| Inputs - Line | 8 x 1/4" |
Essential safety guidelines for operating the audio equipment safely, including warnings and precautions.
Describes microphone (XLR) and line (1/4") inputs on mono channels, including phantom power.
Details LOW CUT filter, Compressor, and 3-band EQ on mono channels.
Explains aux send functions (MON/FX) for effects and monitoring on mono channels.
Describes main section controls for aux sends and stereo aux returns.
Describes rear panel outputs for main mix, subgroups, and control room.
Details the USB port for computer audio interface connectivity.
Explains rear panel power input, phantom power activation, and fuse holder.
Details XLR, 1/4" TS, TRS, and headphone connector wiring for audio inputs/outputs.
Details microphone preamps (EIN, frequency, gain) and line input specs.
