Need help?Do you have a question about the Behringer XENYX 1002 and is the answer not in the manual?
General| Frequency range | 10 - 200000 Hz |
|---|---|
| Channels quantity | 10 channels |
| Digital sound processing | - bit |
| Line Signal-to-Noise Ratio (SNR) | 110 dB |
| Total Harmonic Distortion (THD) | 0.005 % |
| XLR out | 1 |
| Microphone in | Yes |
| DJ mixer | - |
| Product color | Black |
| Power consumption (typical) | 13 W |
Weight and Dimensions| Depth | 220 mm |
|---|---|
| Width | 189 mm |
| Height | 37 mm |
| Weight | 1600 g |
Lists numbered safety instructions for operation and maintenance, covering electrical safety, ventilation, and cleaning.
Details controls and inputs for mono channels, including mic/line inputs, equalizer, FX sends, panorama, and level adjustment.
Describes controls and inputs for stereo channels, including line inputs, equalizer, FX sends, balance, and level adjustment.
Covers the main section's connectors, FX path, monitor/main mix outputs, CD/tape inputs, and signal assignment.
Provides instructions for connecting the power supply unit to the console and the mains power.
Guidance on wiring various audio connectors, including XLR, 1/4" plugs, and RCA cables for different applications.
To Next Page
