Need help?Do you have a question about the Behringer XENYX 1202 and is the answer not in the manual?
General| Frequency range | 10 - 200000 Hz |
|---|---|
| Channels quantity | 12 channels |
| Digital sound processing | - bit |
| Line Signal-to-Noise Ratio (SNR) | 110 dB |
| XLR out | 1 |
| DJ mixer | - |
| Headphone out | Yes |
| Product color | Black |
| Power consumption (typical) | 20 W |
Weight and Dimensions| Depth | 220 mm |
|---|---|
| Width | 242 mm |
| Height | 37 mm |
| Weight | 2200 g |
Covers warnings about electric shock, fire, rain, moisture, and proper usage.
Details on ventilation, heat sources, cleaning, and protection from liquids.
Instructions on qualified servicing, power cord protection, and electrical safety.
A personal introduction and philosophy behind the XENYX series from Uli Behringer.
Introduces the XENYX consoles, highlighting mic preamps, EQ, and analog/digital integration.
Details on XENYX Mic Preamps and "British EQ" characteristics.
Crucial warning regarding extreme volume levels and initial control settings.
Explains the core functions of signal processing, distribution, and mixing.
Explains the manual's layout and use of website resources.
Covers shipment inspection, initial operation setup, and online registration.
Details on XLR mic inputs, phantom power, and 1/4" line inputs.
Describes the 3-band EQ and LOW CUT filter for mono channels.
Explains controls for effects sends, stereo imaging, and channel volume.
Describes stereo line inputs and the 3-band EQ for the XENYX 802.
Covers controls for effects sends, balance, and level adjustment in stereo channels.
Details the effects loop using AUX SEND/RETURN connectors.
Covers headphone, control room, and main mix output controls.
Explains the function of CD/TAPE INPUT connectors for external audio sources.
Explains routing options for CD/TAPE inputs to MIX or CTRL ROOM.
Describes routing the FX SEND signal to the control room.
Critical warning about connecting microphones when phantom power is active.
Explains POWER/CLIP LEDs and setting input levels with TRIM and meters.
Instructions for mains power connection and audio cable wiring.
Visual guides for wiring XLR, 1/4" TS, and 1/4" TRS connectors.
Reinforces the caution regarding MIC inputs and phantom power.
Detailed technical specifications for various inputs and outputs.
Technical data on noise, distortion, and frequency response.
Specifications for power supply, consumption, dimensions, and net weight.
Covers national rights, online registration, and warranty scope.
Details on obtaining service, return procedures, and warranty regulations.
Lists warranty exclusions, transferability, and damage claims limitations.
To Next Page
