Need help?Do you have a question about the Behringer XENYX 302USB and is the answer not in the manual?
Power| mains voltage | 100-240 V, ~ 50/60 Hz |
|---|---|
| power consumption | 0.9 W |
| power connector | USB, type A |
Audio Specifications| frequency response (Mic In - Main Out) | 18 Hz - 40 kHz +0 dB / -1 dB |
|---|---|
| frequency response | 10 Hz - 75 kHz +0 dB / -3 dB |
| signal-to-noise ratio | 98 dB / 101 dB A-weighted |
Input/Output Impedance and Levels| mic input impedance | 20 kΩ |
|---|---|
| mic max input level | +20 dBu |
| main output impedance | 470 Ω |
Weight and Dimensions| dimensions | 1.8 x 4.5 x 5.4 in, 46 x 114 x 136 mm |
|---|---|
| weight | 0.83 lbs / 0.38 kg |
Alerts to risks of electric shock from uninsulated voltage and improper servicing.
Follow all instructions, avoid water, ensure ventilation, keep away from heat, and clean properly.
Connect mixer to audio sources, power, and computer for basic operation.
Select input source for LINE/USB and adjust input sensitivity for MIC/HEADSET.
Positions the audio channel within the stereo field.
Adjust volume for LINE inputs or USB audio return.
Power off devices, connect cables, set initial controls, and connect external equipment.
Adjust GAIN knob while speaking to set optimal input levels.
Configure signal sources, destinations, headphone volume, and channel levels.
Adjust channel positions in the stereo field using PAN/BAL faders.
Connect mixer to computer and configure software for recording.
Details for microphone, stereo line, 2-track, headset mic inputs, and equalizer.
Details for main outputs, headphone output, USB, and system data.
Register equipment online for efficient claims and warranty information.
Resolve malfunctions, contact support, and ensure correct power connections.
To Next Page
