Need help?Do you have a question about the Behringer XENYX X1832USB and is the answer not in the manual?
General| Channels | 18 |
|---|---|
| USB Interface | Yes |
| Phantom Power | +48V |
| Faders | 60mm |
| EQ | 3-band on all channels |
| Effects | Yes, 24-bit multi-FX processor |
| Aux Sends | 2 |
| Outputs - Main | 2 x XLR, 2 x 1/4" |
| USB | 1 x Type B |
| Headphone Output | 1 x 1/4" |
| Mic Preamps | 6 |
Critical warnings and precautions for safe operation.
Details the product's limited warranty terms.
Legal notices and disclaimers regarding product use.
Lists conditions not covered by warranty and its transfer.
Procedures for product registration and return authorization.
Highlights the premium features of XENYX microphone preamps.
Details the British EQ and the 24-bit multi-effects processor.
Explains the FBQ Feedback Detection and Voice Canceller functions.
Outlines the core functions of a mixing console.
Guidance on shipment inspection and initial operation.
Comprehensive overview of console controls and connections.
Details the inputs, gain, EQ, and compressor for mono channels.
Describes the MIC, LINE IN, and INSERT points.
Explains the GAIN, LOW CUT, and COMPRESSOR functions.
Details the 3-band semi-parametric equalizer for mono channels.
Explains the auxiliary send controls for monitoring and effects.
Differentiates between pre-fader and post-fader aux send operation.
Covers routing switches, PAN, SOLO, and MUTE controls.
Explains the MUTE switch, MUTE LED, and CLIP LED functions.
Details inputs and balance control for stereo channels.
Explains stereo EQ and aux send functionality.
Describes the MON control and master aux send controls.
Details FX aux send and solo monitoring for aux sends.
Explains aux send jacks and stereo aux return connectors.
Specific monitor section features of the X1832USB.
Describes mute and solo functions for monitor sends.
Explains controls for stereo aux returns and FX.
Details routing options for stereo aux return signals.
Details STEREO AUX RETURN 4 and routing to phones/control room.
Covers X1832USB FX/AUX2 return and XPQ Surround function.
Explains the Voice Canceller filter and its applications.
Describes connections for CD/Tape devices.
How CD/Tape signals are routed to the meter and outputs.
Explains level meter settings and the MODE switch.
Details the +48 V phantom power supply and precautions.
Describes the graphic equalizer and its controls.
Explains how to use the FBQ Feedback Detection feature.
Overview of the built-in 24-bit multi-effects processor.
Details main mix, insert points, and control room outputs.
Explains the unbalanced subgroup output connections.
Explains channel inserts and direct outputs on X2442USB.
Details the USB connectivity for audio transfer.
Information on power supply, phantom power, and fuses.
Guidance on mounting the console in a 19" rack.
Illustrations of various cable connections.
Diagrams for balanced 1/4" TRS and insert connectors.
Details headphone connector wiring.
To Next Page
