XENYX 502/802/1002/1202
Introduction4
Introduction1.
Congratulations! In purchasing our XENYX 502/802/1002/1202
you have acquired a mixing console whose small size belies its
incredible versatility and audio performance.
The XENYX Series represents a milestone in the development of
mixing console technology. With the new Xenyx microphone pre-
amps including phantom power as an option, balanced line inputs
and a powerful effects section, the mixing consoles in the XENYX
Series are optimally equipped for live and studio applications.
Owing to state-of-the-art circuitry your XENYX console produces
a warm analog sound that is unrivalled. With the addition of the
latest digital technology these best-in-class consoles combine the
advantages of both analog and digital technology.
XENYX Mic Preamps
The microphone channels feature high-end XENYX
Mic Preamps that compare well with costly outboard
preamps in terms of sound quality and dynamics and
boast the following features:
130 dB dynamic range for an incredible amount of head- =
room
A bandwidth ranging from below 10 Hz to over 200 kHz for =
crystal-clear reproduction of even the nest nuances
The extremely low-noise and distortion-free circuitry guaran- =
tees absolutely natural and transparent signal reproduction
They are perfectly matched to every conceivable microphone =
with up to 60 dB gain and +48 volt phantom power supply
They enable you to use the greatly extended dynamic range of =
your 24-bit/192-kHz HD recorder to the full, thereby maintain-
ing optimal audio quality
“British EQ”
The equalizers used for the XENYX Series are based on the
legendary circuitry of top-notch consoles made in Britain, which
are renowned throughout the world for their incredibly warm and
musical sound character. Even with extreme gain settings these
equalizers ensure outstanding audio properties.
CAUTION!
We should like to draw your attention to the fact that +
extreme volumes may damage your hearing and/or
your headphones or loudspeakers. Turn the MAIN MIX
control and PHONES control in the main section fully
counter-clockwise before you switch on the unit. Always
be careful to set appropriate volume levels.
Important notes concerning installation
The sound quality may diminish within the range of pow- +
erful broadcasting stations and high-frequency sources.
Increase the distance between the transmitter and the
device and use shielded cables for all connections.
General mixing console functions1.1
A mixing console fulls three main functions:
= Signal processing: Preamplication, level adjustment, mixing
of effects, frequency equalization.
= Signal distribution: Summing of signals to the aux sends
for effects processing and monitor mix, distribution to one
or several recording tracks, power amp(s), control room and
2-track outputs.
= Mix: Setting the volume level, frequency distribution and posi-
tioning of the individual signals in the stereo eld, level control
of the total mix to match the recording devices/crossover/
power amplier(s). All other mixer functions can be included
in this main function.
The interface of BEHRINGER mixing consoles is optimized for
these tasks enabling you to easily keep track of the signal path.
The user’s manual1.2
The user’s manual is designed to give you both an overview of
the controls, as well as detailed information on how to use them.
In order to help you understand the links between the controls,
we have arranged them in groups according to their function. The
illustrations at the beginning of each chapter show the controls
described in each respective chapter.
The block diagram supplied with the mixing console +
gives you an overview of the connections between the
inputs and outputs, as well as the associated switches
and controls.
For the moment, just try and trace the signal path from the mi-
crophone input to the FX send connector. Don’t be put off by the
huge range of possibilities; it’s easier than you think! If you look
at the overview of the controls at the same time, you’ll be able
to quickly familiarize yourself with your mixing console and you’ll
soon be making the most of all its many possibilities.
If you need to know more about specic issues, please visit our
website at http://www.behringer.com, where you’ll nd explanations
of (for example) effects and dynamics applications.
Before you get started1.3
Shipment1.3.1
Your mixing console was carefully packed in the factory to guaran-
tee safe transport. Nevertheless, we recommend that you carefully
examine the packaging and its contents for any signs of physical
damage, which may have occurred during transit.
If the unit is damaged, please do NOT return it to us, +
but notify your dealer and the shipping company im-
mediately, otherwise claims for damage or replacement
may not be granted.
Initial operation1.3.2
Be sure that there is enough space around the unit for cooling
purposes and to avoid over-heating please do not place your
mixing console on high-temperature devices such as radiators
or power amps. The console is connected to the mains via the
supplied cable. The console meets the required safety standards.
Blown fuses must only be replaced by fuses of the same type
and rating.
Never connect the XENYX to the power supply unit +
when the latter is connected to the mains! First connect
the power supply unit to the console, then connect the
power supply unit to the mains.
Please note that all units must be properly grounded. For +
your own safety, you should never remove any ground
connectors from electrical devices or power cables, or
render them inoperative.
Please ensure that only qualied people install and +
operate the mixing console. During installation and op-
eration, the user must have sufcient electrical contact
to earth, otherwise electrostatic discharges might affect
the operation of the unit.
Online Registration1.3.3
Please register your new BEHRINGER equipment right after your
purchase by visiting http://www.behringer.com and read the terms
and conditions of our warranty carefully.
Should your BEHRINGER product malfunction, it is our intention
to have it repaired as quickly as possible. To arrange for warranty
service, please contact the BEHRINGER retailer from whom the
equipment was purchased. Should your BEHRINGER dealer
not be located in your vicinity, you may directly contact one of
our subsidiaries. Corresponding contact information is included
in the original equipment packaging (Global Contact Information/
European Contact Information). Should your country not be listed,
please contact the distributor nearest you. A list of distributors
To Next Page
Loading...
