Behringer 1002 - Specifications

XENYX 502/802/1002/1202
Specications 9
Specications4.
Mono inputs
Microphone inputs (XENYX Mic preamp)
Type XLR connector, electronically bal-
anced, discrete input circuit
Mic E.I.N.
1
(20 Hz - 20 kHz)
@ 0 Ω source resistance -134 dB / 135.7 dB A-weighted
@ 50 Ω source resistance -131 dB / 133.3 dB A-weighted
@ 150 Ω source resistance -129 dB / 130.5 dB A-weighted
Frequency response
<10 Hz - 150 kHz -1 dB
<10 Hz - 200 kHz -3 dB
Gain range +10 dB to +60 dB
Max. input level +12 dBu @ +10 dB GAIN
Impedance approx. 2.6 kΩ balanced
Signal-to-noise ratio 110 dB / 112 dB A-weighted (0 dBu In
@ +22 dB GAIN)
Distortion (THD+N) 0.005 % / 0.004 % A-weighted
Line input
Type ¼" TRS jack, electronically balanced
Impedance approx. 20 kΩ balanced, approx.
10 kΩ unbalanced
Gain range -10 dB to +40 dB
Max. input level +22 dBu @ 0 dB GAIN
Fade-out attenuation
2
(Crosstalk attenuation)
Main fader closed 90 dB
Channel muted 89.5 dB
Channel fader muted 89 dB
Frequency response (Mic In → Main Out)
<10 Hz - 90 kHz +0 dB / -1 dB
<10 Hz - 160 kHz +0 dB / -3 dB
Stereo inputs
Type ¼" TRS jack, electronically balanced
Impedance approx. 20 kΩ
Max. input level +22 dBu
Equalizer
EQ mono channels
LOW 80 Hz / ±15 dB
MID 2.5 kHz / ±15 dB
HIGH 12 kHz / ±15 dB
EQ stereo channels
LOW 80 Hz / ±15 dB
MID 2.5 kHz / ±15 dB
HIGH 12 kHz / ±15 dB
Send / Return
Aux sends
Type ¼" TS jack, unbalanced
Impedance approx. 120 Ω
Max. output level +22 dBu
Stereo aux returns
Type ¼" TRS jack, electronically balanced
Impedance approx. 20 kΩ balanced / approx.
10 kΩ unbalanced
Max. input level +22 dBu
Outputs
Main outputs
Type ¼" TRS jack, unbalanced
Impedance approx. 120 Ω unbalanced
Max. output level +22 dBu
Control room outputs
Type ¼" TS jack, unbalanced
Impedance approx. 120 Ω
Max. output level +22 dBu
Headphones output
Type ¼" TRS jack, unbalanced
Max. output level +19 dBu / 150 Ω (+25 dBm)
Main mix system data
3
(Noise)
Main mix @ -∞, channel fader @ -∞ -106 dB / -109 dB A-weighted
Main mix @ 0 dB, channel fader @ -∞ -95 dB / -98 dB A-weighted
Main mix @ 0 dB, channel fader @ 0 dB -84 dB / -87 dB A-weighted
Power supply
502
Power consumption 13 W
Mains voltage
USA/Canada, 120 V~, 60 Hz BEHRINGER PSU MX3UL
Europe/U.K./Australia, 230 V~, 50 Hz
BEHRINGER PSU MX3EU
China, 220 V~, 50 Hz BEHRINGER PSU MX3CC
Korea, 220 V~, 60 Hz BEHRINGER PSU MX3KR
Japan, 100 V~, 50/60 Hz BEHRINGER PSU MX3JP
802
Power consumption 17 W
Mains voltage
USA/Canada, 120 V~, 60 Hz BEHRINGER PSU MX3UL
Europe/U.K./Australia, 230 V~, 50 Hz
BEHRINGER PSU MX3EU
China, 220 V~, 50 Hz BEHRINGER PSU MX3CC
Korea, 220 V~, 60 Hz BEHRINGER PSU MX3KR
Japan, 100 V~, 50/60 Hz BEHRINGER PSU MX3JP
1002
Power consumption 18 W
Mains voltage
USA/Canada, 120 V~, 60 Hz BEHRINGER PSU MX3UL
Europe/U.K./Australia, 230 V~, 50 Hz
BEHRINGER PSU MX3EU
China, 220 V~, 50 Hz BEHRINGER PSU MX3CC
Korea, 220 V~, 60 Hz BEHRINGER PSU MX3KR
Japan, 100 V~, 50/60 Hz BEHRINGER PSU MX3JP
1202
Power consumption 23 W
Mains voltage
USA/Canada, 120 V~, 60 Hz BEHRINGER PSU MX5UL
Europe/U.K./Australia, 230 V~, 50 Hz
BEHRINGER PSU MX5EU
China, 220 V~, 50 Hz BEHRINGER PSU MX5CC
Korea, 220 V~, 60 Hz BEHRINGER PSU MX5KR
Japan, 100 V~, 50/60 Hz BEHRINGER PSU MX5JP
Physical/weight
502
Dimensions (H x W x D) 1.9" / 1.5" x 5.3" x 7"
(47 mm / 37 mm x 134 mm x 177 mm)
Weight (net) 1.2 lbs (0.55 kg)
802
Dimensions (H x W x D) 1.9" / 1.5" x 7.4" x 8.7"
(47 mm / 37 mm x 189 mm x 220 mm)
Weight (net) 2.2 lbs (1.00 kg)
1002
Dimensions (H x W x D) 1.9" / 1.5" x 7.4" x 8.7"
(47 mm / 37 mm x 189 mm x 220 mm)
Weight (net) 2.3 lbs (1.05 kg)
1202
Dimensions (H x W x D) 1.9" / 1.5" x 9.5" x 8.7"
(47 mm / 37 mm x 242 mm x 220 mm)
Weight (net) 3 lbs (1.35 kg)
1
Equivalent Input Noise
2
Measuring conditions: 1 kHz rel. to 0 dBu; 20 Hz - 20 kHz; line input; main output;
unity gain.
3
20 Hz - 20 kHz; measured at main output. Channels 1 - 4 unity gain; EQ at; all chan-
nels on main mix; channels 1/3 as far left as possible; channels 2/4 as far right as
possible; reference = +6 dBu.
BEHRINGER is constantly striving to maintain the highest professional standards.
As a result of these efforts, modications may be made from time to time to existing
products without prior notice. Specications and appearance may differ from those
listed or illustrated.