11
B-CONTROL FADER BCF2000-WH
USB-Mode U-4 (expanded):
4. OPERATION
Fig. 4.4: Routing and use in USB mode 4
This operating mode should be selected if you want to couple
two B-CONTROLs to control your software using both
B-CONTROLS through a common USB port. Additionally, MIDI
OUT B of the first controller (unit 1) can be used from the computer
as a 16-channel MIDI output. The data of both B-CONTROLs is
mixed and is sent to the host computer via USB. Select stand-
alone mode 3 for the second unit (unit 2).
To Next Page
Loading...
