Behringer CRAVE - CRAVE Poly Chain Function; MIDI Information; System Mode; MIDI Message

System Mode
Please use the “SynthTool.exe” to con gure the Poly Chain mode.
The POWER LED will turn red during Poly Chain mode.
To enter/exit Poly Chain mode, quickly toggle the SUSTAIN switch
more than 4 times while the SEQUENCER LED are  ashing after
power up.
POWER LED Mode
Amber Normal Mode
Red Poly Chain Mode
CRAVE Poly Chain Function
(EN) Step 6: Poly Chain Function
MIDI message
Status Second Third Parameter Description
Channel
Message
8n kk vv [0, 7F] Note O
9n kk vv [0, 7F] Note On
Bn 01 vv [0, 7F] CC1
Bn 02 vv [0, 7F] CC2
Bn 04 vv [0, 7F] CC4
Bn 05 vv [0, 7F] Glide
Bn 07 vv [0, 7F] CC7
Bn 0C vv [0, 7F] Tempo
Bn 32 vv [0, 7F] Attack
Bn 33 vv [0, 7F] Decay
Bn 34 vv [0, 7F] Sustain
Bn 41 vv [0, 7F] Glide On/O
Bn 7B — — All Notes O
Dn kk — [0, 7F] After Touch
En bb bb [0, 3FFF] Pitch Bend
SysRT
F8 — — — Timing Clock
FA — — — Start
FB — — — Continue
FC — — — Stop
Examples
Function Command
(1)
Note on 90 3C 64
Note o 80 3C 40
Select glide time MIN B0 05 00
Select glide time MAX B0 05 7F
Glide on B0 41 00
Glide o B0 41 7F
All notes o B0 7B
Note: 1, MIDI input channel 1.
MIDI information
POWER LEDSUSTAIN
42 43Quick Start GuideCRAVE