14
3.4 Selecting the operating level
With the „Operating Level“ switch on the rear of the Behringer FEEDBACK DESTROYER you can adjust the
internal operating level of the unit. Thus, the FEEDBACK DESTROYER can be adapted perfectly to various
levels (e.g. both the typical home recording level of -10 dBV and the professional studio level of +4 dBu). The
LED indicators on the front panel help you adjust the operating level as optimally as possible.
In order to be able to check intern overrides the LED display announces the output level of the FEEDBACK
DESTROYER. To adjust the input level, switch the device to
Total Bypass
mode (see 4.1) and control the
input signal in such way that the CLIP-LED does not light up.
3. INSTALLATION
To Next Page
Loading...
Need help?
General
