30
9. SPECIFICATIONS
Analog Inputs
Type 1/4” (6.3 mm) TRS unbalanced
Impedance 100 kOhms
Nominal Operating Level -10dBV to +4dBu
Max. Input Level +16 dBu
Analog Outputs
Type 1/4” (6.3 mm) TRS unbalanced
Impedance 100 Ohms
Max. Output Level +16 dBu
Bandwidth 20 Hz to 20 kHz (+0/-0.5 dB)
THD+N @ 1kHz / +10 dBu 0.01 %
S/N Ratio @ 1 kHz / +10 dBu 98 dB
Crosstalk @ 1kHz 80 dB
MIDI Interface
Type 5-Pin-DIN-Socket IN / OUT / THRU
Implementation Refer to MIDI Implementation Chart in Chapter 7
Digital Processing
Converters 20-bit Sigma-Delta, 64/128-times Oversampling
Sampling Rate 48 kHz
Feedback Destroyer
Type DSP-controlled Digital Signal Analysis
Filter 12 independent, digital Notch Filters per channel
Frequency Range 20 Hz to 20 kHz, adjustable in steps of 1/60 octave
Bandwidth 2/60 to 12/60 octaves, dependent on the characteristic of the feedback
Attenuation Up to -48 dB, depending on the gain of the feedback
Time required to < 0.5 sec, typical at 1 kHz
eliminate feedback
Parametric Equalizer
Type 12 independent filters per channel
Frequency Range 20 Hz to 20 kHz, adjustable in steps of 1/60 octave
Bandwidth 1/60 to 2 octaves, adjustable in steps of 1/60 octave
Gain +16 to -48 dB in steps of 0.5 dB
Display
Type 2 1/2-digit numeric LED-Display
Power Supply
Mains Voltages USA/Canada ~ 120 V AC, 60 Hz
U.K./Australia ~ 240 V AC, 50 Hz
Europe ~ 230 V AC, 50 Hz
General Export Model ~ 100-120 V AC, ~ 200-240 V AC, 50-60 Hz
Fuse 100-120 V AC: 125 mA (slow-blow)
200-240 V AC: 63 mA (slow-blow)
Power Consumption 10 Watts
Mains Connection Standard IEC receptacle
Physical
Dimensions (H * W * D) 1 3/4” (44.5 mm) * 19” (482.6 mm) * 7 1/2” (190.5 mm)
Net Weight 2 kg
Shipping Weight 3.2 kg
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be
made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or
shown.
9. SPECIFICATIONS
To Next Page
Loading...
Need help?
General
