Behringer Europower PMX660M - Specifications

12
EUROPOWER PMX660M/PMX880S
6. SPECIFICATIONS
6. SPECIFICATIONS
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior
notice. Specifications and appearance may differ from those listed or illustrated.
30;0 30;6
Type
Mic E.I.N. (20 Hz - 20 kHz)
@ 0
Ω
source resistance
@ 50
Ω
source resistance
@ 150
Ω
source resistance
Gain
Max. input level
Impedance
Signal-to-noise ratio
Noise (THD + N)
Type
Impedance
Max. input level
Type
-
1/4" TRS connectors, unbalanced
Impedance
-
approx. 100
k
Ω,
unbalanced
Max. input level
-
+21 dBu
Low
Mid
High
Type
Impedance
MAIN
Type
Impedance
Max. output level
MONITOR
Type
Impedance
Max. output level
Type
-
1/4" TRS connectors, unbalanced
Impedance
-
approx. 150
Ω,
unbalanced
Max. input level
-
+21 dBu
Type
RCA, mono output
RCA
Impedance
approx. 1
k
Ω
approx. 1
k
Ω
Max. input level
+21 dBu
+21 dBu
Noise
MAIN MIX @ -oo
Channel fader -oo
MAIN MIX @ 0 dB
Channel fader -oo
MAIN MIX @ 0 dB
Channel fader @ 0 dB
Type
Load impedance
MAIN L/R
-
4 - 8
Ω
MONITOR/MAIN MONO
MAIN MONO/MAIN MONO
BRIDGE
Converter
Dynamics D/A
Sampling rate
Delay Time
Signal run time (Line In > Line Out)
Type
2-digit, 7-segment LED
2 x 2-digit, 7-segment LED
Output power @ 4
Ω
2 x 300 W
2 x 400 W
Output power @ 8
Ω
2 x 150 W
2 x 200 W
Output power @ 8
Ω
(
BRIDGE)
1 x 600 W
1 x 800 W
Mains voltage
Power consumption
480 W
680 W
Fuse
3.15 A (220-240 V) / 5 A (100-110 V)
4 A (220-240 V) / 6.3 A (100-110 V)
Mains connector
9.15 kg
9.35 kg
20.18 lb.
20.62 lb.
Dimensions (H x W x D)
approx. 12 2/5" x 18 1/10" x 8 3/5"
Weight
approx. 315 mm x 460 mm x 220 mm
/28'63($.(52873876
'63
',63/$<
NEUTRIK NL4MP SPEAKON
®
46.875 kHz
max. 5 secs
24-bit Delta-Sigma, 64/128-times oversampling
8 - 16
Ω
85 - 250 V~, 50 / 60 Hz
4 - 8
Ω
Output power
$03/,),(5
32:(56833/<
approx. 1.5 msecs
90 dB
4 - 8
Ω
67(5(2287 3 876
RCA
approx. 10 k
Ω
35($0328738 76
1/4" TS connectors, unbalanced
approx. 150
Ω,
unbalanced
1/4" TS connectors, unbalanced
approx. 150 Ω, unbalanced
+21 dBu
12 kHz / +/-15 dB
67(5(2/,1(,13876
(48$/,=(5
+21 dBu
7 5$&.,1387
80 Hz / +/-15 dB
2.5 kHz / +/-15 dB
approx. 20 k
Ω,
balanced
+21 dBu
0212/,1 (,13876
0.001% / 0.0007% A-weighted
1/4" TS connectors, balanced
IEC standard receptacle
',0(16,216:(,*+7
-112 dB / 114 dB A-weighted
-112 dB / 114 dB A-weighted
-112 dB / 114 dB A-weighted
< 10 Hz - > 200 kHz (-3 dB)
< 10 Hz - 200 kHz (-1 dB)
0$,10,;6<67(0'$7$
-102 dB/-106 dB A-weighted
+30 dB, +10 dB with pad
-88 dB/-91 dB A-weighted
-84 dB/-86 dB A-weighted
0,&523+21(,13876
XLR, electronically balanced input circuit
110 dB / 114 dB A-weighted (0 dBu In @ +10 dB gain)
+12 dBu @ +10 dB gain
approx. 2.2 kΩ balanced / 1.1 kΩ unbalanced
Frequency response