Behringer EX3200 - Design Concept; High-Quality Components and Design; Inputs and Outputs

7
ULTRAFEX PRO EX3200
Surround processor
A switchable surround processor has also been integrated into the ULTRAFEX PRO. With this processor the
intensity of the stereo effect can be dramatically improved. The program material gains in liveliness, depth and
transparency. As in a cinema with its special acoustics, the listener has the impression that the orchestral
instruments are placed all around him. The surround processor enlarges the stereo basis, dependent on the
program material, without audibly coloring the sonic image.
+ The following operational manual will introduce you to the BEHRINGER ULTRAFEX PRO and
its various functions. After reading the manual carefully, make sure it is always on hand for
future reference.
2. THE DESIGN CONCEPT
2.1 High quality components and design
The philosophy behind BEHRINGER products guarantees a no-compromise circuit design and employs the
best choice of components. The operational amplifiers NJM4580 which are used in the ULTRAFEX PRO are
exceptional. They boast extreme linearity and very low distortion characteristics. The most important aspect of
the ULTRAFEX PRO design is a radical VCA implementation which results in outstanding technical
specification and excellent performance. To complement this design, the choice of components includes high
tolerance metalfilm resistors and capacitors, detented potentiometers and several other stringently selected
elements.
For the first time, the ULTRAFEX PRO EX3200 uses SMD technology (Surface Mounted Device). These
sub-miniature components known from aerospace technology allow for an extreme packing density, plus the
units reliability could be improved. Additionally, the unit is manufactured under ISO9000 certified management
system.
2.1.1 Failsafe relays
Failsafe relays have been incorporated into the design of the BEHRINGER ULTRAFEX PRO, which
automatically and silently bypass the unit in the event of power supply disconnection or failure. These relays
are also active at switch-on to isolate the ULTRAFEX PRO until the power rails have settled, thus preventing
the possibility of a potentially damaging switch-on thump.
2.2 Inputs and outputs
2.2.1 Balanced inputs and outputs
As standard, the BEHRINGER ULTRAFEX PRO is installed with electronically servo-balanced inputs and
outputs. The new circuit design features automatic hum and noise reduction for balanced signals and thus
allows for trouble-free operation, even at high operating levels. Externally induced mains hum etc. will be
effectively suppressed. The automatic servo-function recognizes the presence of unbalanced connectors and
adjusts the nominal level internally to avoid level differences between the input and output signals (correction
6 dB).
2.2.2 Transformer balanced outputs (optional)
In contrast to electronic balancing, the use of transformer-balanced outputs offers the advantage of galvanic
separation between units. Electrical potential differences and ground loops in audio installations do not
therefore impair the performance of the units. The transformer-balanced outputs, commonly used in radio and
TV engineering, can also be fitted retrospectively upon request. The BEHRINGER transformer OT-1 is
designed to the highest exacting standards and is available as an accessory.
2. THE DESIGN CONCEPT