Page 4 of 4
For service, support or more information contact the BEHRINGER location nearest you:
Technical specifications and appearances are subject to change without notice and accuracy is not guaranteed. BEHRINGER is part of the MUSIC Group (music-group.com). All trademarks are the property of their respective owners. MUSIC Group accepts no liability for any loss
which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colors and specifications may vary from actual product. MUSIC Group products are sold through authorized fullfillers and resellers only.
Fullfillers and resellers are not agents of MUSIC Group and have absolutely no authority to bind MUSIC Group by any express or implied undertaking or representation. This manual is copyrighted. No part of this manual may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of MUSIC Group IP Ltd. ALL RIGHTS RESERVED. © 2012 MUSIC Group IP Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town,
Tortola, British Virgin Islands.
Europe
MUSIC Group Services UK
Tel: +44 156 273 2290
Email: CARE@music-group.com
USA/Canada
MUSIC Group Services NV Inc.
Tel: +1 702 800 8290
Email: CARE@music-group.com
Japan
MUSIC Group Services JP K.K.
Tel.: +81 3 6231 0454
Email: CARE@music-group.com
Specication
Output Power
Maximum Output Power
4-channel
8 Ω per channel 4 x 440 W
4 Ω per channel 4 x 860 W
2 Ω per channel 4 x 1600 W
Bridge connection
8 Ω per bridged pair 2 x 1600 W
4 Ω per bridged pair 2 x 3000 W
System
Controls
Front Power switch Gain controls
(channels 1, 2, 3, and 4)
Rear 2 x Mode switch
(bridge / stereo / mono)
2 x Crossover switch
(fullrange / 100 Hz)
Indicators
Power Amber backlit illuminated
gain controls
Limit (per channel) Red LED (0 dB, full scale)
Signal (per channel) Amber LED (-24 dB, -12 dB, -6 dB)
Connectors
Inputs 4 x combo jacks
Input impedance 10 kΩ unbalanced, 20 kΩ balanced
Outputs 4 x locking-style professional
speaker connectors
Output circuit type Class-D
Distortion <0.2%
Frequency response 20 Hz to 20 kHz, +0 / -2 dB
Damping factor >120 @ 8 Ω
Signal-to-noise >100 dB
Circuit protection
Cooling Continuously variable speed fan
Back-to-front air ow
Amplier protection Thermal and DC protection Stable into
reactive or mismatched loads
Load protection On/o muting, DC-fault
power supply shutdown
Power Supply, Voltage (Breaker)
USA / Canada 120 V~, 60 Hz, (25 A 250 VAC)
UK / Australia / Europe 220-240 V~, 50/60 Hz, (12 A 250 VAC)
Korea / China 220-240 V~, 50/60 Hz, (12 A 250 VAC)
Japan 100 V~, 50/60 Hz, (25 A 250 VAC)
Power consumption at 620 W
1/8 Max. non-clipped
output @ 2 Ω
Power consumption at 4800 W
Max. attainable
output @ 2 Ω
Mains connector Standard IEC receptacle
Dimensions / Weight
Dimensions (H x W x D) appr. 3.7 x 19 x 12.2"
appr. 94 x 482 x 310 mm
Weight appr. 12.4 lbs / 5.6 kg
Please note these specifications are preliminary and conceptual in nature, and as such are subject
to change as product development progresses. This information is supplied for market research
purposes only and is not to be made public in any manner. This document is solely the property of
The MUSIC Group, or one of its subsidiaries, and must be surrendered upon request of the owner.
iNUKE
NU4-6000
To Previous Page
Loading...
