Behringer NEUTRON - Page 24

24 NEUTRON User Manual
Inputs (TS 3.5 mm)
OSC 1 Control voltage: 1 V per octave
OSC 2 Control voltage: 1 V per octave
OSC 1&2 Control voltage: 1 V per octave
INVERT IN inverts voltage
SHAPE 1 Control voltage: -5 V to +5 V
SHAPE 2 Control voltage: -5 V to +5 V
PULSE WIDTH 1 Control voltage: -5 V to +5 V
PULSE WIDTH 2 Control voltage: -5 V to +5 V
VCF IN Signal input
FREQ MOD Control voltage: -5 V to +5 V
RESONANCE Control voltage: -5 V to +5 V
OVERDRIVE IN Signal input
VCA IN Signal input
VCA CV Control voltage: -9 V to +9 V
DELAY IN Signal input
DELAY TIME Control voltage: -5 V to +5 V
E GATE 1 Control voltage: -5 V to +5 V (envelope triggers @ 1.5 V)
E GATE 2 Control voltage: -5 V to +5 V (envelope triggers @ 1.5 V)
SAMPLE & HOLD IN Signal input
SAMPLE & HOLD CLOCK Control voltage: -5 V to +5 V (S&H triggers @ 3 V)
LFO RATE Control voltage: -5 V to +5 V
LFO SHAPE Control voltage: -5 V to +5 V
LFO TRIG Control voltage: -5 V to +5 V (S&H triggers @ 1.6 V)
MULT (Multiple) Input Signal is duplicated on Mult 1 and Mult 2 outputs
ATT 1 IN Signal input
ATT 1 CV Control voltage: -5 V to +5 V
ATT 2 IN Signal input
SLEW IN Signal or CV input
SUM1(A) Signal input or CV input
SUM1(B) Signal input or CV input
SUM2(A) Signal input or CV input
SUM2(B) Signal input or CV input
Outputs (TS 3.5 mm)
OSC 1 Max. +14 dBu
OSC 2 Max. +14 dBu
OSC Mix Max. +14 dBu
VCF 1 Max. +12 dBu
VCF 2 Max. +12 dBu
OVERDRIVE Max. +18 dBu
VCA Max. +18 dBu
OUTPUT Max. +15 dBu
NOISE Max. +18 dBu
ENV 1 Control voltage: 0 V to +9 V
ENV 2 Control voltage: 0 V to +9 V
INVERT inverts signals up to +/-9.5 V
LFO Control voltage: -5 V to +5 V
LFO UNI Control voltage: 0 V to +5 V
SAMPLE & HOLD Tracks input voltage upto a maxiumum of 9.5 V
MULT 1 Tracks input voltage upto a maxiumum of 9.5 V
MULT 2 Tracks input voltage upto a maxiumum of 9.5 V
MIDI GATE Control voltage: 0 V to +3.3 V
ATT 1 Control voltage -9.5 V to +9.5 V (dependant on input
signal)
ATT 2 Max output voltage dependant on input signal
SLEW Control Voltage -9.5 V to +9.5 V (dependant on input
signal)
SUM 1 Control Voltage -9.5 V to +9.5 V (dependant on input
signals)
SUM 2 Control Voltage -9.5 V to +9.5 V (dependant on input
signals)
ASSIGN Control voltage: 0 V to +5 V
Power Requirements
External power adaptor 12 V DC, 1000 mA (12 W)
Power consumption 7.5-9 W typical
Enviormental
Operating temperature
range
5 °C to 40 °C (41 °F to 104 °F)
Physical
Dimensions (H x W x D) 94 x 424 x 136 mm (3.7 x 16.7 x 5.4")
Weight 2.0 kg (4.4 lbs)
Shipping weight 3.0 kg (6.6 lbs)
Eurorack HP 80 HP