Behringer POLY D - MOD WHEEL Calibration Procedure; Calibrate MOD WHEEL Max;Min Positions

page 6 of 10
985-40000-01084 Rev.A
2021-02-03
Condential, for internal use only. Not to be reproduced.
page 6 of 10
Synthesizers and Samplers
POLY D
Start MOD WHEEL Calibration
1. First move MOD WHEEL to its minimum position.
2. Press button “3” to calibrate MOD WHEEL.
3. Button “3” LED will light and Region A LEDs will indicate current MOD WHEEL position.