Behringer POLY D - AFTER TOUCH Calibration Procedure; Calibrate AFTER TOUCH Minimum Position

page 8 of 10
985-40000-01084 Rev.A
2021-02-03
Condential, for internal use only. Not to be reproduced.
page 8 of 10
Synthesizers and Samplers
POLY D
Calibrate MOD WHEEL Minimum Position
Move the MOD WHEEL to its minimum position. Region A LEDs will show minimum position of MOD WHEEL.
Start AFTER TOUCH Minimum Position Calibration
1. Press button“4” to calibrate AFTER TOUCH minimum position.
2. Button “4” LED will light on and region A LEDs will indicate current AFTER TOUCH value.