Behringer PRO-1 - Oscillator A Controls; Wave Shape Controls; SYNC Switch

Behringer Pro-1 Ctrlr panel documentation and instructions v2.0
sunny.synths@gmail.com Page 14 of 49
Loading a Behringer Pro-1 program
The panel loads and saves the program parameters as a 600 bytes sysex file (.syx) from/to your
computer.
Clicking the Load button opens a classical Open file dialog where you can select the file to load. An
internal check is done to verify that the file is compatible with the Behringer Pro-1 panel. The
parameters are loaded, the top screen is showing the name of the file, the author and the saved date
and a confirmation dialog is shown.
If the Auto GS (Automatic send of Global Settings) button is lit, the panel will send the Global settings
to your Pro-1 synth at load. Nothing will happen if your synth is not connected by Midi/USB or if your
synth is on another Midi channel than the one set in the MIDI menu of the panel.
Verify the Auto GS button before loading a program. If lit, the panel will send the Global
settings to your Pro-1 synth at load.