Behringer Pro-1 Ctrlr panel documentation and instructions v2.0
sunny.synths@gmail.com Page 18 of 49
Behringer Pro-1 tab
In the Behringer Pro-1 tab, you have access to the same parameters as on the actual synthesizer.
Please refer to the Behringer Pro-1 user manual
(https://www.behringer.com/Categories/Behringer/Keyboards/Synthesizers-and-Samplers/Pro-
1/p/P0DRK) for the explanations of each encoder/button.
The third top screen is showing the name and the value of the parameter you are modifying.
Doing a single click on any rotary encoder is displaying its name and current value without that you
need to modify it.
Modifying the ADSR encoders of the filter and the amplifier is setting identical encoders/buttons in
the Envelopes and Patches tab and adapting the envelopes graphs accordingly.
Patch cables drawing
In this tab you can also draw your patch cables.
To draw a patch cable, click on an output patch point, keep the mouse button pressed, drag the cable
to a patch input point then release the mouse button.
To Next Page
Loading...
