Behringer Pro-1 Ctrlr panel documentation and instructions v2.0
sunny.synths@gmail.com Page 45 of 49
Using a controller to move the buttons
If you connected a controller like the Novation SL MkII then you can benefit from moving all knobs of
the panel from your controller.
This has been achieved by assigning Midi CC controller numbers to all the knobs.
Of course, as nothing is changed in the hardware, moving the knobs from your controller will not
affect the sound as such.
Connect your controller for example as in Configuration 1 presented on page 6
Controller numbers are the following:
As part of the provided files, you get 2 Novation SL MkII templates (page 1 and page 2). Install them I
2 consecutive advanced templates presets. You can then navigate between page 1 and 2 using the
row select buttons of your SL MkII.
To Next Page
Loading...
