Behringer Pro-1 Ctrlr panel documentation and instructions v2.0
sunny.synths@gmail.com Page 22 of 49
Env Out", "Amp Env Out", "Phones", "Audio Out", "Synth1 CV output", "Synth2 CV output", "Synth1
Gate output", "Synth2 Gate output", "Sequencer track 1", "Sequencer track 2", "FX output"
Available “To” destinations are the input patch points of the synthesizer plus a few additional
external ones: "Not connected", "Mod Wheel CV In", "Osc CV In", "Gate Clock In", "LFO CV In", "Ext
In", "Cutoff CV In", "Resonance CV In", "Synth1 CV input", "Synth2 CV input", "Synth1 Gate input",
"Synth2 Gate input", "FX input"
Clicking the Author button opens a popup window where you can modify the name of the author of
the patch. The name should be maximum 15 characters long (will be truncated if longer). If you leave
the Author name empty then a “?“ is displayed.
Clicking the Synth1 button opens a popup window where you can modify the name of a synth
connected to your Pro-1. The name should be maximum 11 characters long (will be truncated if
longer). If you leave the Synth1 name empty then a “-“ is displayed.
Clicking the Synth2 button opens a popup window where you can modify the name of a second synth
connected to your Pro-1. The name should be maximum 11 characters long (will be truncated if
longer). If you leave the Synth2 name empty then a “-“ is displayed.
Clicking the FX button opens a popup window where you can modify the name of a FX chain
connected to your Pro-1. The name should be maximum 15 characters long (will be truncated if
longer). If you leave the FX name empty then a “-“ is displayed.
Global settings
You can manage three Pro-1 global settings:
─ Note priority
─ Pitch Bend range
─ Midi Clock Output
The settings are saved in each program sysex file and thus loaded with them.
The Auto GS button allows you to automatically send to the Pro-1 synth the global settings at
program load or when each individual global setting is modified.
To Next Page
Loading...
