Behringer Pro-1 Ctrlr panel documentation and instructions v2.0
sunny.synths@gmail.com Page 9 of 49
─ Connect the Pro-1 to the computer by USB
─ Connect your master keyboard by Midi DIN to the Pro-1. Notes will come from this connection
─ Power the Pro-1 On. The master keyboard will be dedicated to the Pro-1.
─ Start the Pro-1 panel
─ In the Midi menu, select Output – Device Pro-1
─ In the Midi menu, select Output – Channel 1 (set this to the Midi channel of your Pro-1). This is
done to only send Global Settings to the Pro-1
Configuration 3: USB and USB-Midi
─ Connect the Pro-1 to the computer by USB – Midi cable going OUT of the PC to the Midi IN of the
Pro-1.
─ Connect your master keyboard by USB (connecting the master keyboard by USB to the computer
gives you the possibility to use it for the Pro-1 but also for VST plugins or other soft synths)
─ Power the Pro-1 On
─ Start the Pro-1 panel
─ In the Midi menu, select Input – Device your_master_keyboard
─ In the Midi menu, select Input – Channel 1 (set this to the Midi channel of your Pro-1). This is
done to receive notes from the master keyboard.
─ In the Midi menu, select Output – Device Pro-1
─ In the Midi menu, select Output – Channel 1 (set this to the Midi channel of your Pro-1). This is
done to send Global Settings and Notes to the Pro-1
─ In the Midi menu, select Midi Thru – Input Device -> Output Device. This is done to send the
received notes to the synth
To Next Page
Loading...
