Behringer RD-8 MKII - Pattern Parameters

21 RD-8 MKII User Manual
Parameter Name Description Values
Random Steps
(1 – 64)
The sequencer events triggered on the 64 steps
of the Random Steps track: Events include Step
On/O, Step Prob on/o, step am on/o, Step
Repeat on/o and Step repeat size.
*See description
below
* Information useful for power users wishing to implement their own editors. Each of the 64 bytes in a track has
its bits set/cleared as follows:
Bit 0 STEP_BYTE_MASK_ON_OFF_BIT – 1=Step On, 0=Step Off
Bit 1 RESERVED – Reserved / Not used
Bit 2 STEP_BYTE_MASK_PROBABILITY_BIT – 1=Step On, 0=Step Off
Bit 3 STEP_BYTE_MASK_FLAM_BIT – 1=Step On, 0=Step Off
Bit 4 STEP_BYTE_MASK_NOTE_REPEAT_ON_OFF_BIT – 1=Step On, 0=Step Off
Bit 5 STEP_BYTE_MASK_NOTE_REPEAT_LS_BIT 00 = Repeat 1, 01 = Repeat 2, 10 = Repeat 4,
11 = Repeat 8
Bit 6 STEP_BYTE_MASK_NOTE_REPEAT_MS_BIT 00 = Repeat 1, 01 = Repeat 2, 10 = Repeat 4,
11 = Repeat 8
Bit 7 RESERVED
Pattern Parameters
Some of the parameters in the Pattern Data le are comparable to the Global
Parameters. When these parameters are in use (i.e. the corresponding
Preference is set to Pattern), selecting a new pattern for playback will trigger
the corresponding change in the sequencer. A change to the Step Size is one
such example.
Parameter Name Description Values
Tempo The tempo of the song is stored. 20 – 240 BPM
Swing The Swing level is stored. 25% to 75%
Probability
The probability of a step being heard is
stored per song.
0 – 100 %
Flam The am level is stored per song 0 - 24
Filter Mode
Filter Mode is stored per song,
either LPF or HPF.
0 = LPF,
1 = HPF
Filter Enable Whether the lter is on/o per song.
0 = O,
1 = On
Filter Automation Automation of the lter is stored per song.
0 = Inactive,
1 = Active
Filter Step Values
(1 - 64)
Filter step values per song are stored. 0 – 255
Polymeter Polymeter is either on/o per song.
0 = O,
1 = On
Step Size Step size is stored for the song.
0 = 1/8th,
1 = 1/8th Tr,
2 = 1/16th,
3 = 1/16th Tr,
4 = 1/32ndth
Auto Advance
Whether or not the song will auto advance to
the next or not is stored per song.
0 = O,
1 = On
FX Bus Sends
Whether or not the FX bus send is active or not,
stored per song.
0 = Inactive,
1 = Active
Mute Voices Which voices are muted, stored by song.
0 = Inactive,
1 = Active
Solo Voices Which voices are soloed, stored by song.
0 = Inactive,
1 = Active