26 RD-8 MKII User Manual
16. Specications
Voices
Number of sounds 16
Type Analog
Number of simultaneous voices 11 (12 including global accent)
Sound Controls
Accent Level
Bass drum Level, tone, decay, tuning
Snare drum Level, tone, snappy
Low, mid, hi conga / Level, tuning, voice selection
low, mid, hi tom
Claves / rim shot Level, voice selection
Maracas / hand clap Level, oset, voice selection
Cow bell Level
Cymbal Level, tone, decay
Open hat Level, tone, decay
Closed hat Level, tone
Select buttons 16 Voice select buttons
Connectivity
Outputs
Phones 1 x ¼ TRS, stereo, 8 impedance
Mono 1 x ¼ TRS, servo-balanced
Voice out 11 x ¼ TS, unbalanced
MIDI In, Out & Thru 3 x 5-pin DIN
Trigger outs 3 x +5 V,1 ms pulse
Sync in / out 2 x ⁄ TS
USB Class compliant USB 2.0, type B
Supported operating systems Windows 7 or higher
Mac OS X 10.6.8 or higher
Volume controls Master, phones
Return (Input) 1 x ¼ TRS, balanced
Wave Designer
Bus 11 voices, independently assignable
Controls
Attack -15 to +15 dB, adjustable
Sustain -24 to +24 dB, adjustable
Send button On/o, switchable
Sig LED Red
Analog Filter
Type State variable, 12 dB slope
Cuto 10 Hz - 15 kHz, adjustable
Resonance 0 - 10, adjustable
HPF button LPF / HPF mode, switchable
On button On / o, switchable
Sync Section
Mode selector Internal / MIDI / USB / TRIG, selectable
Sequencer Section
Edit buttons Save, copy, erase and dump
Mode buttons Song, pattern and step
Control Encoder for data editing
Playback controls Tap / hold, record, stop, play / pause
Data mode Tempo / swing / prob / am, selectable
Auto scroll On / o, rewind, length (16 / 32 / 48 /
64, selectable), fast forward
Trigger On / o, repeat division (1 / 2 / 4 / 8,
selectable), step repeat, note repeat
Track Mute / solo, selectable
Step buttons 16 step enter buttons
Settings
Settings Enter settings mode, use step buttons
to select operation.
Autoll
Autoll Enter autoll selection mode
Songs / Storage
Song mode Chain any of the 16 songs together
for full sets
Pattern / Storage
Capacity 16 songs, 16 patterns each
Pattern mode Up to 99 iterations per pattern/part
Steps 64 steps
Power Supply
External power adapter 18 V DC, 1000 mA
Power consumption 15 W typical
Environmental
Operating temperature range 5°C to 40°C (41°F to 104°F)
Physical
Dimensions (H x W x D) 77 x 498 x 265 mm (3.0 x 19.6 x 10.4)
Weight 3.0 kg (6.6 lbs)