Behringer Super Octaver SO400 User Manual

SUPER OCTAVER SO400
TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS PART OF THE
MUSIC GROUP (MUSIC-GROUP.COM). ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. MUSICGROUP ACCEPTS NO LIABILITY FOR ANY LOSS
WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN.
COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS
ONLY. FULLFILLERSAND RESELLERS ARE NOT AGENTS OF MUSICGROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND MUSICGROUP BY ANY EXPRESS OR
IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM
OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS
WRITTEN PERMISSION OF MUSICGROUPIPLTD. ALL RIGHTS RESERVED. © 2012 MUSICGroupIPLtd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town,
Tortola, British Virgin Islands
◊ The SO400 has no On/O switch. It is operable as soon as you insert a plug into one of
the IN connectors. Disconnect the plug, if you don’t use the SO400. In doing so, you can
extend the life time of the battery.
The SERIAL NUMBER is located at the underside.
◊ In rare cases interferences of the normal function may appear by external inuence
(e.g. electrostatic discharge), as for example sound disturbances or malfunctions. If this
occurs, please turn down the volume on subsequent ampliers and disconnect the input
connector briey to restart the application.
2. Safety Instructions
Do not use near water, or install near heat sources. Use only authorized attachments/accessories.
Do not service product yourself. Contact our qualied servicing personnel for servicing or repairs,
especially when power supply cord or plug is damaged.
3. Warranty
Please register your new BEHRINGER equipment right after your purchase by visiting
http://behringer.com and read the terms and conditions of our warranty carefully.
4. Specications
Gtr In / Bass In
Connector ¼" TS
Impedance 500 kΩ
Dir Out / Out A
Connector ¼" TS
Impedance 1 kΩ
Power Supply
9 V𝌂, 100 mA regulated
BEHRINGER PSU-SB
USA/Canada 120 V~, 60 Hz
China/Korea 220 V~, 50 Hz
Europe/U.K./ 230 V~, 50 Hz
Australia
Japan 100 V~, 50 - 60 Hz
Export model 120/230 V~, 50 - 60 Hz
Power connector 2 mm DC jack,
negative center
Battery 9 V type 6LR61
Power consumption 60 mA
Physical/Weight
Dimensions approx. 2 ⁄ x 2 ¾ x 4 ⁄"
(H x W x D) approx. 54 x 70 x 123 mm
Weight approx. 0.73 lbs / 0.33 kg
BEHRINGER is constantly striving to maintain the
highest professional standards. As a result of these efforts,
modifications may be made from time to time to existing
products without prior notice. Specifications and appearance
may therefore differ from those listed or shown.

Behringer Super Octaver SO400 Specifications

Ports & interfaces

GTR IN / BASS IN connector type	1/4" TS
DIR OUT / OUT A connector type	1/4" TS
Power connector type	2 mm DC jack, negative center

Power

Power supply voltage	9 V
Power supply current	100 mA
Battery type	9 V type 6LR61
Power consumption	60 mA

Operating Environment

USA/Canada voltage	120 V~, 60 Hz
China/Korea voltage	220 V~, 50 Hz
Europe/U.K./Australia voltage	230 V~, 50 Hz
Japan voltage	100 V~, 50 - 60 Hz
Export model voltage	120/230 V~, 50 - 60 Hz

Impedance

GTR IN / BASS IN impedance	500 kΩ
DIR OUT / OUT A impedance	1 kΩ

Weight and Dimensions

Height	54 mm (2 1/8")
Width	70 mm (2 3/4")
Depth	123 mm (4 4/5")
Weight	0.33 kg (0.73 lbs)