Behringer Super Octaver SO400 User Manual

FEDERAL COMMUNICATIONS
COMMISSION COMPLIANCE INFORMATION
Responsible Party Name: MUSIC Group Services US Inc.
Address: 18912 North Creek Parkway,
Suite 200 Bothell, WA 98011,
USA
Phone Number: Phone: +1 425 672 0816
SUPER OCTAVER SO400
complies with the FCC rules as mentioned in the followingparagraph:
This equipment has been tested and found to comply with the limits for a ClassB digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the followingmeasures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV technician forhelp.
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Important information:
Changes or modications to the equipment not expressly approved by MUSIC Group can void
the user’s authority to use the equipment.
SUPER OCTAVER SO400

Behringer Super Octaver SO400 Specifications

Ports & interfaces

GTR IN / BASS IN connector type	1/4" TS
DIR OUT / OUT A connector type	1/4" TS
Power connector type	2 mm DC jack, negative center

Power

Power supply voltage	9 V
Power supply current	100 mA
Battery type	9 V type 6LR61
Power consumption	60 mA

Operating Environment

USA/Canada voltage	120 V~, 60 Hz
China/Korea voltage	220 V~, 50 Hz
Europe/U.K./Australia voltage	230 V~, 50 Hz
Japan voltage	100 V~, 50 - 60 Hz
Export model voltage	120/230 V~, 50 - 60 Hz

Impedance

GTR IN / BASS IN impedance	500 kΩ
DIR OUT / OUT A impedance	1 kΩ

Weight and Dimensions

Height	54 mm (2 1/8")
Width	70 mm (2 3/4")
Depth	123 mm (4 4/5")
Weight	0.33 kg (0.73 lbs)