18
V-AMP
440 Hz and press the right arrow key three times, the display reads 43, i.e. 443 Hz. Quit SETUP mode by
pressing the TUNER or TAP button. Any changes will be stored automatically. The reference tones for the
remaining strings on your guitar will be adjusted automatically to the new reference pitch.
7. INSTALLATION
7.1 Audio connections
The input of your BEHRINGER V-AMP is on a mono 1/4" jack. The LINE OUT, AUX IN and PHONES inputs/
outputs are on stereo 1/4" jacks. The LINE OUT works with both balanced and unbalanced connections.
Fig. 7.1: Wiring of various 1/4" plugs
7. INSTALLATION
To Next Page
Loading...
