Behringer V-TONE ADI21 - Safety Instructions

14 V-TONE ACOUSTIC DRIVER DI ADI21
Bottom of the ADI21
(13) SERIAL NUMBER. The serial number of the ADI21 is located at
the bottom.
(14) BATTERY COMPARTMENT. Open the lid to install or replace the
9 V battery.
◊ ◊ The ADI21 is powered as soon you insert a plug into the
INPUT. The battery is “disconnected” when the plug is
removed. For this reason, the ADI21 has no on/o switch.
To prolong battery life, always disconnect the input when
the driver is not in use.
Power supply connector
(15) Use the DC IN connection to plug in a 9 V power supply
(notincluded).
2. Safety Instructions
Do not use near water, or install near heat sources. Use only authorized
attachments/accessories. Do not service product yourself. Contact our
qualied servicing personnel for servicing or repairs, especially when
power supply cord or plug is damaged.
(14)
(13)
(15)