Beko B3T4823DW - User Manual

40 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

B3T4823DW

Dryer

User Manual

EN

2 9 6 0 3 1 3 0 5 4 _ E N / 07-07-21.(11:45)

Table of Contents

Questions and Answers

C
cindycookAug 17, 2025
Why are my clothes still damp after using my Beko B3T4823DW?
- S
  Samantha MaloneAug 17, 2025
  If clothes are damp after drying in your Beko Dryer, it could be due to: * Using a program not suitable for the laundry type - check the maintenance labels on the clothes and select a program suitable for the clothes' type or use time programs as extra. * Clogged fibre filter pores - wash the filters with warm water and dry them. * Clogged condenser front side - clean the front side of the condenser. * Excessive laundry load - do not load the drying machine excessively. * Inadequate wringing - perform a higher speed wringing on the washing machine.
A
Anthony WallaceAug 20, 2025
What to do if the Beko B3T4823DW doesn't turn on?
- D
  Daniel MunozAug 20, 2025
  If your Beko Dryer doesn't turn on, check the following: * Ensure the power cord is plugged in. * Make sure the loading door is properly closed. * Verify that a program is set and it is not in Pause position. * Check if the child lock is activated and turn it off.
M
Matthew MillsAug 22, 2025
Why does my Beko B3T4823DW Dryer program stop for no reason?
- M
  Michael PetersonAug 22, 2025
  If your Beko Dryer program stops unexpectedly, consider these possibilities: * The loading door might not be closed completely - ensure that the loading door is properly closed. * There might have been a power outage - press the Start / Pause / Cancel button to start the program. * The water tank may be full - empty the water tank.
K
Keith MaloneAug 25, 2025
What does it mean when the fibre filter cleaning icon is lit on my Beko B3T4823DW?
- P
  Pamela LynnAug 26, 2025
  The fibre filter cleaning icon on your Beko Dryer lights up when: * The fibre filter may be unclean - wash the filters with warm water and dry them. * A layer may be formed on the fibre filter pores that leads to clogging - wash the filters with warm water and dry them. * Fibre filters may not be inserted - insert the interior and exterior filters to their places. * Environmentally-friendly filter cloth may not be installed on the plastic part and the front of the condenser may have clogged - install the environmentally-friendly filter to the plastic part and place it on the filter housing. * Environmentally-friendly filter may have not been replaced although the warning symbol is illuminated - replace your filter.
D
Denise Crawford DVMAug 27, 2025
Why is the water tank warning symbol on my Beko Dryer flashing?
- J
  Jamie JonesAug 27, 2025
  The water tank warning symbol on your Beko Dryer flashes when: * The water tank may be full - empty the water tank. * The water discharge hose might have collapsed - if the product is connected directly to the water drain check the water discharge hose.
A
Ashley ContrerasAug 30, 2025
Why is the condenser warning icon flashing on my Beko B3T4823DW?
- C
  cantunicholasAug 30, 2025
  The condenser warning icon flashes on your Beko Dryer because: * The condenser front side may be clogged with fibres - clean the front side of the condenser. * Fibre filters may not be inserted - insert the interior and exterior filters to their places.
M
Matthew CarrSep 1, 2025
How to fix a Beko B3T4823DW loading door that opens by itself?
- J
  Jared Green IIISep 1, 2025
  If the loading door of your Beko Dryer opens by itself, push the loading door until the closing sound is heard.
T
Tony GarciaSep 4, 2025
Why does my Beko Dryer take so long to dry?
- R
  Ruben HollandSep 4, 2025
  The drying operation might be taking too long due to several reasons: * The fibre filter pores may be clogged - wash the fibre filters with warm water and dry them. * The condenser front side may be clogged - clean the front side of the condenser. * The ventilation grills in front of the machine may be blocked - remove any object in front of the ventilation grills that blocks air. * The room may be too small - open the door or windows to prevent the room temperature from rising very high. * A lime layer may have accumulated on the humidity sensor - clean the humidity sensor. * Too much laundry might be loaded - do not load the drying machine excessively. * Laundry might not have been wrung adequately - perform a higher speed wringing on the washing machine.
R
Robin DaughertySep 6, 2025
What to do if clothes have shrunk in my Beko B3T4823DW?
- P
  pgillSep 6, 2025
  If clothes have shrunk, hardened, or spoiled in your Beko Dryer, it is likely because a program not suitable for the laundry type was used. Check the maintenance labels on the clothes and select a program suitable for the clothes.
J
jaredmillerSep 9, 2025
Why is my Beko Dryer wifi icon flashing continuously?
- O
  omarshSep 9, 2025
  If the WiFi icon is flashing continuously on your Beko Dryer, it could be due to: * The product may not be connected to the wireless network - follow the instructions to connect to the network. * The device which the product utilizes to connect to network may be faulty - check it. * The product may not be connecting to the network due to proximity.

Beko B3T4823DW Specifications

General

Brand	Beko
Model	B3T4823DW
Category	Dryer
Language	English

Related product manuals

Beko B3T48231DW

Preview: Beko B3T4824DW

Beko B3T48241DW

Preview: Beko B3T4811DW

Preview: Beko B3T4911DW

Preview: Beko B3T4923DW

Preview: Beko B3T4924DW

Preview: Beko B3T41011DW

Beko B3T41011DW

Beko B3T6823WS2