EasyManua.ls Logo

Beko B3T6823WS2 - User Manual

Beko B3T6823WS2
64 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Trockner
Bedienungsanleitung
Dryer
User Manual
DE / EN
2960313434_DE/ 11-08-22.(16:22)
B3T6823M2
B3T6823WS2

Table of Contents

Questions and Answers

  • N
    Nathan FosterAug 20, 2025
    What to do if my Beko B3T6823WS2 clothes come out damp?
    • G
      garrettstevenAug 20, 2025
      If your clothes are still damp after a drying cycle, several issues could be the cause. First, the selected program may not be suitable for the type of laundry you're drying. Check the care labels and choose an appropriate program, or use a time program. Clogged fibre filters or a blocked condenser can also prevent proper drying, so wash the filters and clean the condenser. Overloading the dryer or not wringing clothes well enough beforehand can also leave them damp. Avoid overloading, and ensure clothes are wrung at a higher speed in your washing machine before drying.
  • M
    Michael TorresAug 22, 2025
    What to do if my Beko B3T6823WS2 Dryer fibre filter cleaning icon is lit?
    • A
      Andrew DukeAug 22, 2025
      The fibre filter cleaning icon lights up when the fibre filter (interior and exterior) is unclean, or a layer has formed on the fibre filter pores that leads to clogging. Wash the filters with warm water and dry them. It is also possible that the fibre filters are not inserted properly, so insert the interior and exterior filters to their places. If your dryer uses an environmentally-friendly filter cloth, make sure it is installed on the plastic part and placed on the filter housing. Replace the environmentally-friendly filter if the warning symbol is still illuminated after cleaning.
  • R
    rebeccaswansonAug 25, 2025
    Why won't my Beko Dryer turn on?
    • A
      Allison ChapmanAug 25, 2025
      If your Beko Dryer isn't turning on, first check that the power plug is properly inserted. Also, ensure that the loading door is fully closed. Verify that a program is selected and that the dryer is not in Pause mode. Finally, check if the child lock is activated and, if so, deactivate it.
  • B
    Brian MartinezAug 26, 2025
    Why does my Beko Dryer take so long to dry?
    • L
      Lauren RomeroAug 27, 2025
      Several factors can cause prolonged drying times. The fibre filters may be clogged – wash them with warm water and dry them. The condenser front might be blocked – clean it. Ensure the ventilation grills aren't obstructed. Inadequate ventilation in the room can also be a factor, so open a door or window. A lime layer on the humidity sensor can cause this issue, so clean the humidity sensor. Overloading the machine or not wringing clothes adequately beforehand can also extend drying times. Avoid excessive loads, and ensure clothes are wrung at a higher speed in your washing machine.
  • K
    Kristopher ScottAug 28, 2025
    Why does my Beko B3T6823WS2 water tank warning symbol is on?
    • D
      daryl67Aug 28, 2025
      The water tank warning symbol illuminates when the water tank is full. Empty the water tank. Also, check the water discharge hose for collapses if the product is connected directly to the water drain.
  • D
    Danielle CollinsAug 30, 2025
    Why does my Beko Dryer condenser warning icon flash?
    • J
      Johnny GrantAug 30, 2025
      The condenser warning icon flashes because the condenser front side may be clogged with fibres, or the fibre filters may not be inserted. Clean the front side of the condenser and make sure the interior and exterior filters are properly placed.
  • L
    Linda McguireSep 1, 2025
    What to do if my Beko B3T6823WS2 program terminated prematurely?
    • A
      April HopkinsSep 1, 2025
      If your Beko Dryer program stops unexpectedly, first ensure that the loading door is completely closed. A power outage may have occurred; press the Start / Pause / Cancel button to restart the program. The water tank might also be full, so empty it.
  • M
    mckayaliciaSep 3, 2025
    Why do my clothes have shrunk in Beko Dryer?
    • J
      jeffrey41Sep 3, 2025
      Clothes may shrink, harden, or spoil if a program not suitable for the laundry type was used. Check the maintenance labels on the clothes and select a program suitable for the clothes.
  • C
    carolyn07Sep 5, 2025
    Why is my Beko B3T6823WS2 Wifi icon flashing?
    • J
      Jennifer NolanSep 5, 2025
      If the Wifi icon is flashing on your Beko Dryer (for models with HomeWhiz), it indicates that the product may not be connected to the wireless network. Follow the instructions to connect to the network. Also, the device used to connect to the network may be faulty, so check it.
  • E
    Emily FisherSep 7, 2025
    Why is my Beko Dryer making an audible warning?
    • H
      harrisdavidSep 7, 2025
      An audible warning from the Beko dryer suggests that the fibre filters may not be inserted, or the filters of the machine may not have been installed. Insert the interior and exterior filters to their places or install the fibre filters (internal and external) or the environmentally-friendly filter to their housing.

Beko B3T6823WS2 Specifications

General IconGeneral
BrandBeko
ModelB3T6823WS2
CategoryDryer
LanguageEnglish

Related product manuals