Why does my Beko Dryer condenser warning icon flash?
The condenser warning icon flashes because the condenser front side may be clogged with fibres, or the fibre filters may not be inserted. Clean the front side of the condenser and make sure the interior and exterior filters are properly placed.
What to do if my Beko B3T6823M2 fibre filter cleaning icon is lit?
The fibre filter cleaning icon lights up when the fibre filter (interior and exterior) is unclean, or a layer has formed on the fibre filter pores that leads to clogging. Wash the filters with warm water and dry them. It is also possible that the fibre filters are not inserted properly, so insert the interior and exterior filters to their places. If your dryer uses an environmentally-friendly filter cloth, make sure it is installed on the plastic part and placed on the filter housing. Replace the environmentally-friendly filter if the warning symbol is still illuminated after cleaning.
Why won't my Beko B3T6823M2 turn on?
If your Beko Dryer isn't turning on, first check that the power plug is properly inserted. Also, ensure that the loading door is fully closed. Verify that a program is selected and that the dryer is not in Pause mode. Finally, check if the child lock is activated and, if so, deactivate it.
Why is the drying operation taking too long on my Beko B3T6823M2 Dryer?
If the drying operation of your Beko Dryer is taking too long, it might be due to several reasons. The fibre filters (interior and exterior) could be clogged, so try washing them with warm water and drying them. The condenser front side may also be clogged, requiring cleaning. Ensure that the ventilation grills in front of the machine are not blocked by any objects. Inadequate ventilation in a small installation area can also cause this, so open a door or window. A lime layer on the humidity sensor could be the culprit, so clean the humidity sensor. Avoid overloading the machine, and ensure laundry is adequately wrung before drying.
What to do if clothes come out damp after drying in my Beko B3T6823M2?
If clothes are damp after drying in your Beko Dryer, it could be due to using an unsuitable program for the laundry type. Check the maintenance labels on the clothes and select a suitable program or use time programs as extra. Clogged fibre filters (interior and exterior) can also cause this, so wash and dry them. The condenser front side might be clogged, requiring cleaning. Avoid overloading the machine, and ensure laundry is adequately wrung before drying.
How to fix a Beko B3T6823M2 that does not turn on or start a program?
If your Beko Dryer doesn't turn on or the program won't start, first ensure the power cord is plugged in. Check that the loading door is properly closed. Verify that a program is set and the dryer is not in Pause mode. Also, the child lock may be activated, so turn it off.
What to do if I see the “F L t” message on my Beko B3T6823M2?
The “F L t” message on your Beko Dryer indicates that the filters may be dirty. Clean the internal and external filters or replace the eco-friendly filter. If you use a double filter, ensure that both filters are installed. If you use the eco-friendly filter feature, ensure that the filter cloth is installed to the plastic part. Also, the area in front of the condenser may be dirty, so inspect and clean the toe board area.
What to do if my Beko B3T6823M2 Dryer program terminated prematurely?
If your Beko Dryer program stops unexpectedly, first ensure that the loading door is completely closed. A power outage may have occurred; press the Start / Pause / Cancel button to restart the program. The water tank might also be full, so empty it.
What to do if the loading door of my Beko B3T6823M2 Dryer opens by itself?
If the loading door of your Beko Dryer opens by itself, push the loading door until you hear the closing sound to ensure it is completely closed.
What to do if the Beko Dryer program terminated prematurely?
If the program on your Beko Dryer terminates prematurely, ensure that the loading door is properly closed. If there was a power outage, press the Start / Pause / Cancel button to restart the program. Also, the water tank may be full, so empty it.
General| Capacity | 8 kg |
|---|---|
| Drying Programs | 15 |
| Dryer type | Heat Pump |
| Number of Programs | 15 |
| Type | Freestanding |
| Color | White |
To Next Page
