EasyManua.ls Logo

Beko B3T68230 - User Manual

Beko B3T68230
64 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
B3T68230
2960313186_EN/ 27-10-21.(9:47)
EN / RO
Dryer
User Manual
Uscător
Manual de utilizare

Table of Contents

Questions and Answers

  • L
    Lori WhiteAug 17, 2025
    What to do if clothes come out damp after drying in my Beko Dryer?
    • J
      John DanielsAug 18, 2025
      If your clothes are damp after drying in your Beko Dryer, consider these possibilities: * You may have used a program not suitable for the laundry type. Check the maintenance labels on the clothes and select a suitable program or use time programs as extra. * The fibre filters (interior and exterior) may be clogged. Wash the filters with warm water and dry. * The condenser front side may be clogged. Clean the front side of the condenser. * You might be loading too much laundry. Do not load the drying machine excessively. * The laundry might not have been wrung adequately. Perform a higher speed wringing on the washing machine.
  • R
    Rebecca SmithAug 20, 2025
    Why won't my Beko B3T68230 turn on or start a program?
    • C
      Carol JordanAug 20, 2025
      If your Beko Dryer won't turn on or start, check the following: * Ensure the power plug is properly plugged in. * Make sure the loading door is completely closed. * Verify that a program is set and the dryer is not in Pause mode. * Check if the child lock is activated and turn it off if necessary.
  • J
    John KellyAug 22, 2025
    What does it mean when the fibre filter cleaning icon is lit on my Beko Dryer?
    • J
      Julie GalvanAug 22, 2025
      If the fibre filter cleaning icon is lit, the fibre filter (interior and exterior filter) may be unclean. Wash the filters with warm water and dry them. A layer may have formed on the fibre filter pores that leads to clogging. Also, ensure that the interior and exterior filters are inserted in their places.
  • J
    John HermanAug 25, 2025
    Why is water dripping from the loading door of my Beko Dryer?
    • J
      Jessica JonesAug 26, 2025
      Water may drip from the loading door if fibres have gathered on the inner sides of the loading door and the loading door gasket. Clean the inner surfaces of the loading door and the loading door gasket surfaces.
  • C
    Curtis FigueroaAug 27, 2025
    Why does my Beko Dryer take so long to dry?
    • J
      Jonathan LoganAug 28, 2025
      Your Beko Dryer might be taking too long due to several reasons: * The fibre filters (interior and exterior) may be clogged. Wash them with warm water and dry. * The condenser front side may be clogged. Clean the front side of the condenser. * The ventilation grills in front of the machine may be blocked. Remove any object blocking air. * The room may be too small, causing inadequate ventilation. Open the door or windows. * There may be a lime layer on the humidity sensor. Clean the humidity sensor. * You might be loading too much laundry. Do not load excessively. * The laundry might not have been wrung adequately. Perform a higher speed wringing on the washing machine.
  • D
    dcoleAug 30, 2025
    What to do if the water tank warning symbol is on or flashing on my Beko Dryer?
    • M
      Michaela WilliamsAug 30, 2025
      If the water tank warning symbol is on or flashing, it means that the water tank may be full. Empty the water tank. Also, if the product is connected directly to the water drain check the water discharge hose, because it might have collapsed.
  • S
    Sara SnowSep 1, 2025
    Why does the condenser warning icon flash on my Beko B3T68230 Dryer?
    • A
      Angela StewartSep 2, 2025
      The condenser warning icon may be flashing because the condenser front side is clogged with fibres. Clean the front side of the condenser. Also, ensure that the interior and exterior fibre filters are correctly inserted.
  • Q
    qbrownSep 4, 2025
    What to do if my Beko B3T68230 Dryer program terminated prematurely for no reason?
    • M
      Mary BuckSep 4, 2025
      If your Beko Dryer program stopped for no apparent reason: * Ensure that the loading door is properly closed. * If there was a power outage, press the Start / Pause / Cancel button to restart the program. * The water tank may be full. Empty the water tank.
  • G
    grantjosephSep 6, 2025
    Why have my clothes shrunk, hardened, or spoiled after using my Beko B3T68230 Dryer?
    • S
      Stacey KelleySep 6, 2025
      Clothes may shrink, harden, or spoil if a program not suitable for the laundry type was used. Check the maintenance labels on the clothes and select a program suitable for the clothes.
  • D
    davidmcfarlandSep 9, 2025
    Why is the Wifi icon flashing continuously on my Beko B3T68230?
    • J
      James BakerSep 9, 2025
      The Wifi icon flashes continuously on Beko Dryer (for models featuring HomeWhiz Function) because the product may not be connected to the wireless network. Follow the instructions to connect to the network. Also, the device which the product utilize to connect to network may be faulty. Check it.

Beko B3T68230 Specifications

General IconGeneral
BrandBeko
ModelB3T68230
CategoryDryer
LanguageEnglish

Related product manuals