Beko B3T4911DW User Manual (English)

Questions and Answers:

D
Dennis LambAug 19, 2025
Why is the Beko B3T4911DW Dryer taking so long to dry?
- M
  Martin SolisSep 12, 2025
  Several factors can cause a Beko Dryer to take longer than expected: * The fibre filters (both interior and exterior) may be clogged. Wash them with warm water and dry them thoroughly. * The condenser front side might be blocked. Clean the front side of the condenser. * The ventilation grills in front of the dryer may be obstructed. Remove any objects blocking airflow. * The room may be too small, causing inadequate ventilation. Open a door or window to lower the room temperature. * A lime layer may have formed on the humidity sensor. Clean the humidity sensor. * The dryer may be overloaded. Avoid excessive loads. * The laundry may not have been wrung out enough. Use a higher spin speed on your washing machine.
A
Alexander FischerAug 21, 2025
What to do if Beko B3T4911DW clothes come out damp?
- A
  anthony73Aug 21, 2025
  If your clothes are still damp after a drying cycle in your Beko Dryer, it could be due to several reasons: * The selected program may not be suitable for the type of laundry. Check the care labels on your clothes and choose an appropriate program, or use a timed program. * The fibre filters (interior and exterior) might be clogged. Wash and dry the filters thoroughly. * The condenser front side may be blocked. Clean the front side of the condenser. * The dryer may be overloaded. Avoid putting too much laundry in the dryer. * The laundry may not have been wrung out sufficiently. Use a higher spin speed on your washing machine.
J
Julie KimAug 23, 2025
What to do if my Beko B3T4911DW Dryer doesn't turn on?
- H
  Hannah SmithAug 25, 2025
  If your Beko Dryer won't turn on or the program won't start: * Ensure the power cord is properly plugged in. * Make sure the loading door is completely closed. * Verify that a program is selected and that the dryer is not in Pause mode. * Check if the child lock is activated and, if so, turn it off.
P
Patrick WarrenAug 26, 2025
Why is the water tank warning symbol on my Beko B3T4911DW flashing?
- C
  Cassandra WalkerAug 26, 2025
  The water tank warning symbol on your Beko Dryer flashes because: * The water tank may be full. Empty the water tank. * The water discharge hose might be collapsed. If your dryer is connected directly to a water drain, inspect the water discharge hose.
A
adamherringAug 28, 2025
Why does the Beko B3T4911DW Dryer program terminate prematurely?
- S
  Sandra FloydAug 28, 2025
  A Beko Dryer program might stop early due to: * The loading door may not be closed completely. Ensure that the loading door is properly closed. * A power outage might have occurred. Press the Start / Pause / Cancel button to restart the program. * The water tank may be full. Empty the water tank.
J
joshua85Aug 30, 2025
Why is the condenser warning icon flashing on my Beko Dryer?
- T
  Tyrone SandersAug 30, 2025
  The condenser warning icon flashes on your Beko Dryer when: * The front side of the condenser is clogged with fibres. Clean the front side of the condenser. * The fibre filters may not be inserted. Insert the interior and exterior filters into their designated places.
A
Alexander MarshallSep 1, 2025
Why is water dripping from the loading door of my Beko B3T4911DW Dryer?
- J
  Jennifer BrandtSep 1, 2025
  Water drips from the loading door of a Beko Dryer because fibres might have gathered on the inner sides of the loading door and the loading door gasket. Clean the inner surfaces of the loading door and the loading door gasket surfaces.
R
Ryan StevensSep 3, 2025
Why does the loading door on my Beko Dryer open by itself?
- K
  Kayla RobinsonSep 3, 2025
  The loading door on your Beko Dryer opens by itself because it might not be closed completely. Push the loading door until you hear the closing sound.
A
Alice BryantSep 5, 2025
Why is the lighting inside my Beko Dryer not turning on?
- C
  Carrie WashingtonSep 5, 2025
  The lighting inside the Beko Dryer does not turn on because: * The drying machine might not have been turned on using the On/Off button. Check that the drying machine is turned on. * The lamp might be malfunctioning.
T
Tammy MartinSep 7, 2025
Why do clothes shrink in Beko B3T4911DW Dryer?
- J
  Jennifer GillSep 7, 2025
  Clothes can shrink, harden, or spoil in a Beko Dryer if a program unsuitable for the laundry type has been used. Check the maintenance labels on the clothes and select a program suitable for the clothes.

Beko B3T4911DW Specifications

General

Control type	Buttons, Rotary
Display type	LED
Loading type	Front-load
Drying system	Condensation
Product color	White
Built-in display	Yes
Reversible doors	No
Door opening angle	155 °
Appliance placement	Freestanding
Cycle time	149 min
Noise level	65 dB
Drying class	B
Drum capacity	9 kg
Left-on mode duration	30 min
Number of drying levels	3
Ambient temperature (min)	5 °C
Number of drying programs	15
Number of temperature settings	2
Energy consumption per cycle (full load)	5.21 kWh
Current	11.5 A
Heat source	Electric
Heater power	2300 W
Connected load	2500 W
AC input voltage	230 - 240 V
AC input frequency	50 Hz
Energy efficiency scale	A to G
Power consumption (off)	0.5 W
Annual energy consumption	615.7 kWh
Power consumption (left-on)	1 W
Self-cleaning	-
Feet adjustment	15 mm
Delay start (max)	24 h
Package depth	630 mm
Package width	650 mm
Package height	885 mm
Package weight	36000 g
Required tools	Standard tool box
Outlet hose length	1.3 m
Paper packaging weight	400 g
Plastic packaging weight	201 g
Harmonized System (HS) code	84512100
Expanded Polystyrene (EPS) packaging weight	793 g

Weight and Dimensions

Depth	609 mm
Width	598 mm
Height	846 mm
Weight	35000 g

Summary

Safety Instructions

Intended Use and Child Safety

Guidelines for proper appliance usage and safety measures for children, vulnerable persons, and pets.

Electrical Safety

Precautions for safe electrical connection, usage, and maintenance to prevent shocks and hazards.

Transport and Installation Safety

Safe procedures for moving the appliance and ensuring correct installation to prevent damage or injury.

Usage Safety

Rules for safe operation, including load limits, door usage, and avoiding hazards during use.

Maintenance and Cleaning Safety

Safe practices for cleaning and maintaining the appliance to prevent damage and ensure longevity.

Lighting and Steam Program Safety

Safety advice for the drum light and precautions when using steam programs.

Environmental Instructions

Your Drying Machine

Technical Specifications

Details on the appliance's dimensions, capacity, power, and other technical parameters.

Appearance and Scope of Delivery

Overview of the appliance's external design and a list of included accessories and components.

Installation Guide

Choosing the Right Installation Location

Guidance on selecting an appropriate location for the drying machine, considering ventilation and stability.

Shipping Safety Removal and Water Connection

Steps for removing transit protection and connecting the water discharge hose for proper operation.

Leveling and Moving the Appliance

Instructions for leveling the appliance using adjustable feet and safe methods for moving it.

Lighting Bulb Replacement

Guidance on how to safely replace the drum lighting bulb or LED.

Preparation for Drying

Laundry Suitability and Preparation

Information on which laundry items can be dried and how to prepare them for the drying process.

Unsuitable Laundry Types

List of garment types and materials that should not be dried in the machine to prevent damage.

Energy Saving Tips

Recommendations for optimizing drying cycles to reduce energy consumption and improve efficiency.

Correct Load Capacity Guidelines

Guidelines on the maximum weight of laundry to load for optimal performance and to prevent damage.

Running Your Dryer

Control Panel and Symbols Guide

Overview of the appliance's control panel buttons and operational symbols for easy understanding.

Program Selection and Consumption Data

Details on available drying programs, their descriptions, capacity, and energy consumption.

Using Auxiliary Functions

Explanation of additional functions like dryness level, wrinkle prevention, and low temperature settings.

Understanding Indicators and Starting Programs

Understanding warning signals and the procedure for starting a drying cycle.

Maintenance and Cleaning

Cleaning the Lint Filter and Door Interior

Instructions for cleaning the lint filter and the interior of the loading door after each use.

Cleaning the Dryer Sensors

Guidance on how to clean the appliance's dampness sensors for accurate drying.

Draining Water Tank and Condenser Care

Procedures for emptying the water tank and cleaning the condenser for optimal performance.

Troubleshooting Guide

Electrical Connection and Safety

Power Supply and Socket Requirements

Important notes on power supply, socket accessibility, and voltage/frequency requirements.

Fitting a Compatible Plug

Instructions for safely replacing the appliance's plug if it is not compatible with the socket.

Related product manuals

Beko B3T4911DW User Manual

Table of Contents

Questions and Answers:

Beko B3T4911DW Specifications

Summary

Safety Instructions

Intended Use and Child Safety

Electrical Safety

Transport and Installation Safety

Usage Safety

Maintenance and Cleaning Safety

Lighting and Steam Program Safety

Environmental Instructions

Your Drying Machine

Technical Specifications

Appearance and Scope of Delivery

Installation Guide

Choosing the Right Installation Location

Shipping Safety Removal and Water Connection

Leveling and Moving the Appliance

Lighting Bulb Replacement

Preparation for Drying

Laundry Suitability and Preparation

Unsuitable Laundry Types

Energy Saving Tips

Correct Load Capacity Guidelines

Running Your Dryer

Control Panel and Symbols Guide

Program Selection and Consumption Data

Using Auxiliary Functions

Understanding Indicators and Starting Programs

Maintenance and Cleaning

Cleaning the Lint Filter and Door Interior

Cleaning the Dryer Sensors

Draining Water Tank and Condenser Care

Troubleshooting Guide

Electrical Connection and Safety

Power Supply and Socket Requirements

Fitting a Compatible Plug

Related product manuals