Beko B3T4824DW User Manual

40 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

B3T4824DW

Dryer

User Manual

EN

2 9 6 0 3 1 3 0 5 0 / 06-07-21.(16:07)

Table of Contents

Questions and Answers:

M
Mark JuarezAug 19, 2025
Why are my clothes still damp after drying in my Beko B3T4824DW Dryer?
- J
  Jeffrey ParkAug 19, 2025
  If clothes are damp after a drying cycle in your Beko Dryer, the issue might be: * Using the wrong program: Ensure you select a program suitable for the type of laundry you're drying by checking the maintenance labels on the clothes. You can also use time programs as extra. * Clogged filters: Wash the fibre filters with warm water and dry them. * Clogged condenser: Clean the front side of the condenser. * Overloading: Avoid loading the dryer with too much laundry. * Insufficient wringing: Perform a higher speed wringing on the washing machine before drying.
A
Alexis PriceAug 21, 2025
What to do if my Beko B3T4824DW doesn't turn on?
- K
  Kristen ShafferAug 22, 2025
  If your Beko Dryer won't turn on, check the following: * Power plug: Ensure the power cord is properly plugged in. * Loading door: Make sure the loading door is completely closed. * Program settings: Verify that a program is selected and the dryer is not in Pause mode. * Child lock: Deactivate the child lock if it's enabled.
C
Candace GoodAug 25, 2025
Why is the fibre filter cleaning icon lit on my Beko B3T4824DW Dryer?
- D
  Doris BellAug 25, 2025
  The fibre filter cleaning icon lights up on your Beko Dryer when the fibre filter (interior and exterior filter) may be unclean. Wash the filters with warm water and dry. A layer may be formed on the fibre filter pores that leads to clogging, so wash the filters with warm water and dry. Also, make sure that you insert the interior and exterior filters to their places.
J
Jason ColeAug 26, 2025
Why does water drip from the loading door of my Beko B3T4824DW Dryer?
- C
  christophergonzalezAug 26, 2025
  If water drips from the loading door of your Beko Dryer, fibres might have gathered on the inner sides of the loading door and the loading door gasket. Clean the inner surfaces of the loading door and the loading door gasket surfaces.
H
Hector SmithAug 28, 2025
Why does my Beko B3T4824DW Dryer take so long to dry?
- S
  smithginaAug 28, 2025
  Several factors can cause a Beko Dryer to take longer than expected: * Clogged fibre filters: Wash the fibre filters with warm water and dry them. * Clogged condenser: Clean the front side of the condenser. * Blocked ventilation grills: Remove any obstructions in front of the ventilation grills. * Inadequate ventilation: Open a door or window to lower the room temperature. * Lime buildup on humidity sensor: Clean the humidity sensor. * Overloading: Avoid loading the dryer with too much laundry. * Insufficient wringing: Use a higher speed wringing setting on your washing machine.
J
jenningschristianAug 30, 2025
What to do if the water tank warning symbol is on my Beko B3T4824DW Dryer?
- M
  Monica FordAug 30, 2025
  If the water tank warning symbol is illuminated on your Beko Dryer, it indicates that the water tank may be full. Empty the water tank. Also, if the product is connected directly to the water drain, check the water discharge hose for any collapse.
Z
zfoleySep 1, 2025
Why is the condenser warning icon flashing on my Beko B3T4824DW Dryer?
- K
  Kelly SotoSep 1, 2025
  The condenser warning icon on your Beko Dryer flashes when the condenser front side may be clogged with fibres. Clean the front side of the condenser. Also, make sure that you insert the interior and exterior filters to their places.
M
Mrs. Audrey BriggsSep 3, 2025
What to do if the Beko B3T4824DW program terminated prematurely?
- D
  daviddavisSep 3, 2025
  If your Beko Dryer program stops unexpectedly, consider these potential causes: * Loading door: Ensure that the loading door is properly closed. * Power outage: If there was a power interruption, press the Start / Pause / Cancel button to restart the program. * Full water tank: Empty the water tank.
K
Kristina MacdonaldSep 5, 2025
What to do if I see the 'F L t' message on the screen of my Beko B3T4824DW?
- M
  Mark WoodsSep 6, 2025
  If you see the “F L t” message on the screen of your Beko Dryer, it means that filters may be dirty. Clean internal and external filters or replace the eco-friendly filter. If you use double filter, as an internal and external filter, on the cover area, ensure that both filters are installed. If you use the eco-friendly filter feature, ensure that the filter cloth is installed to the plastic part. The area in front of the condenser may be dirty, so open and inspect the toe board area and ensure that it is clean.
K
Katie PriceSep 7, 2025
Why do clothes shrink in my Beko B3T4824DW Dryer?
- N
  Nicholas RyanSep 8, 2025
  Clothes may shrink, harden, or spoil in your Beko Dryer if a program not suitable with the laundry type was used. Check the maintenance labels on the clothes and select a program suitable for the clothes.

Beko B3T4824DW Specifications

General

Appliance placement	Freestanding
Drying system	Condenser
Rated capacity	8 kg
Heat source	Electric
Width	60 cm
Height	85 cm
Control type	Electronic
Remaining time indication	Yes
Delay Start	Yes
Child Lock	Yes
Loading type	Front load
Drying programs	Cotton, Wool, Synthetic

Related product manuals

Preview: Beko B3T4823DW

Beko B3T48231DW

Preview: Beko B3T4811DW

Preview: Beko B3T4923DW

Preview: Beko B3T41011DW

Beko B3T41011DW

Preview: Beko B3T6724W2

Preview: Beko B3T6823M2

Preview: Beko B3T6924WS

Beko B3T6823WS2