What to do if my Beko B3T42242 Dryer does not turn on?
If your Beko Dryer isn't turning on, first ensure the power cord is plugged in. Check that the loading door is properly closed. Also, verify that a program is set and the dryer is not in pause mode. Finally, make sure the child lock is deactivated.
How to clean fibre filter cleaning icon on Beko B3T42242?
The fibre filter cleaning icon lights up when the fibre filter (interior and exterior) may be unclean. Wash the filters with warm water and dry them. Also, make sure the interior and exterior filters are inserted to their places.
Why does my Beko B3T42242 take so long to dry?
Several factors can cause prolonged drying times. The fibre filters (interior and exterior) might be clogged, so wash them with warm water and dry them. The condenser front side may be clogged, so clean it. Ensure the ventilation grills in front of the machine are not blocked. Inadequate ventilation in a small installation area can also be the reason, so open a door or window. A lime layer on the humidity sensor requires cleaning. Avoid overloading the machine, and ensure laundry is adequately wrung before drying.
What to do if clothes come out damp after drying in my Beko Dryer?
If your clothes are damp after drying, it could be due to several reasons. You might have used a program not suitable for the laundry type, so check the maintenance labels and select an appropriate program. Clogged fibre filters (interior and exterior) can also cause this issue, so wash them with warm water and dry. A clogged condenser front also needs cleaning. Avoid overloading the dryer, and make sure your laundry is adequately wrung before drying.
What does the wrinkle prevention icon mean on my Beko B3T42242 Dryer?
The wrinkle prevention icon indicates that the Anti-Crease mode is activated, which prevents the laundry in the drier from creasing. Turn the drier off and remove the laundry.
How to resolve condenser warning icon flashing on Beko Dryer?
The condenser warning icon flashes when the condenser front side may be clogged with fibres, so clean the front side of the condenser. Also, ensure that the interior and exterior filters are inserted to their places.
Why are my clothes shrunk after using Beko B3T42242?
Clothes may shrink, harden, or spoil if a program not suitable for the laundry type was used. Check the maintenance labels on the clothes and select a suitable program.
How to fix water dripping from the loading door of my Beko B3T42242?
If water drips from the loading door, fibres might have gathered on the inner sides of the loading door and the loading door gasket. Clean the inner surfaces of the loading door and the loading door gasket surfaces.
How to resolve Beko B3T42242 Dryer loading door opens by itself?
If the loading door opens by itself, it might not be completely closed. Push the loading door until you hear the closing sound.
Why is the water tank warning symbol flashing on my Beko B3T42242 Dryer?
The water tank warning symbol flashes because the water tank may be full, so empty it. Alternatively, if the product is connected directly to the water drain, the water discharge hose might have collapsed, so check the water discharge hose.
General| Appliance placement | Freestanding |
|---|---|
| Drying system | Condenser |
| Rated capacity | 8 kg |
| Capacity | 8 kg |
| Drying class | B |
| Noise level | 66 dB |
| Energy efficiency class | A++ |
| Heat source | Electric |
| Width | 60 cm |
| Height | 85 cm |
| Number of Programs | 15 |
| Loading type | Front load |
To Next Page
