EasyManua.ls Logo

Beko B3T6724W2 - User Manual

Beko B3T6724W2
64 pages
Go to English
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Trockner
Bedienungsanleitung
Dryer
User Manual
B3T6724W2
DE / EN
2960313347_DE/ 17-05-22.(10:41)

Table of Contents

Questions and Answers

  • B
    Bethany ReidAug 15, 2025
    Why is my Beko Dryer taking so long to dry?
    • S
      sramosAug 15, 2025
      If the drying operation of your Beko Dryer is taking longer than usual, several factors could be the cause. The fibre filters (both interior and exterior) might be clogged; try washing them with warm water and drying them. The condenser front side may be clogged, so clean it. Ensure that the ventilation grills in front of the machine are not blocked. Inadequate ventilation in a small installation area can also cause this; open a door or window to lower the room temperature. A lime layer on the humidity sensor can also extend drying time, so clean the sensor. Avoid overloading the machine, and ensure laundry is adequately wrung before drying.
  • M
    Mrs. Ashley HernandezAug 17, 2025
    What to do if clothes come out damp after drying in my Beko B3T6724W2?
    • A
      Angela Lewis PhDAug 17, 2025
      If your clothes are coming out damp after drying in your Beko Dryer, it might be due to several reasons. You may have used a program not suitable for the laundry type; check the maintenance labels and select an appropriate program. Clogged fibre filters (interior and exterior) can also cause this; wash them with warm water and dry. The condenser front side might be clogged, so clean it. Avoid overloading the machine and ensure your laundry is adequately wrung before drying.
  • J
    John CampbellAug 21, 2025
    How to fix a Beko Dryer that does not turn on?
    • R
      Richard BrownAug 21, 2025
      If your Beko Dryer is not turning on or the program won't start, check a few things. First, ensure the power cord is properly plugged in. Make sure the loading door is completely closed. Verify that a program is selected and that the dryer is not in Pause mode. Also, check if the child lock is activated and, if so, turn it off.
  • K
    Kayla ColemanAug 25, 2025
    Why is the water tank warning symbol on my Beko B3T6724W2?
    • M
      Mrs. Megan WhiteAug 25, 2025
      If the water tank warning symbol is on or flashing on your Beko Dryer, the water tank may be full, so empty it. If your product is connected directly to the water drain, the water discharge hose might have collapsed, so check it.
  • D
    David Holloway MDAug 27, 2025
    Why have my clothes shrunk in my Beko B3T6724W2 Dryer?
    • L
      littlemichealAug 27, 2025
      If your clothes have shrunk, hardened, or spoiled after drying in your Beko Dryer, it's possible that you used a program not suitable for the laundry type. Check the maintenance labels on your clothes and select a more appropriate program.
  • M
    Michelle GilbertAug 31, 2025
    Why is water dripping from the loading door of my Beko Dryer?
    • K
      Kenneth AtkinsonAug 31, 2025
      If water is dripping from the loading door of your Beko Dryer, fibres might have gathered on the inner sides of the loading door and the loading door gasket. Clean these surfaces.
  • O
    owaltersSep 3, 2025
    Why does the loading door of my Beko Dryer open by itself?
    • K
      Kevin RodgersSep 3, 2025
      If the loading door of your Beko Dryer opens by itself, it might not be completely closed. Push the loading door until you hear the closing sound.
  • L
    Linda RobinsonSep 6, 2025
    What to do if my Beko B3T6724W2 program stopped for no reason?
    • M
      michaelstaffordSep 7, 2025
      If your Beko Dryer program terminates prematurely, it could be due to a few reasons. Ensure that the loading door is completely closed. There might have been a power outage; press the Start / Pause / Cancel button to restart the program. The water tank may be full; empty it.
  • R
    Ronald DavisSep 10, 2025
    Why is the Wifi icon flashing on my Beko B3T6724W2?
    • A
      Andrew FrancoSep 12, 2025
      If the Wifi icon is flashing continuously on your Beko Dryer (for models featuring HomeWhiz Function), the product may not be connected to the wireless network. Follow the instructions to connect to the network. Also, the device which the product uses to connect to the network may be faulty, so check it.

Beko B3T6724W2 Specifications

General IconGeneral
Capacity7 kg
Energy Efficiency ClassA++
Noise Level65 dB
Width60 cm
Height85 cm
ColourWhite
Drying Programs15

Related product manuals