Why is the water tank warning symbol on or flashing on my Beko B3T6823M2 Dryer?
If the water tank warning symbol is on or flashing on your Beko Dryer, it likely means the water tank is full, so empty it. Also, if the product is connected directly to the water drain, check the water discharge hose for any collapses.
Why does my Beko Dryer water tank warning symbol is on?
The water tank warning symbol illuminates when the water tank is full. Empty the water tank. Also, check the water discharge hose for collapses if the product is connected directly to the water drain.
Why does my Beko B3T6823M2 Dryer take so long to dry?
Several factors can cause prolonged drying times. The fibre filters may be clogged – wash them with warm water and dry them. The condenser front might be blocked – clean it. Ensure the ventilation grills aren't obstructed. Inadequate ventilation in the room can also be a factor, so open a door or window. A lime layer on the humidity sensor can cause this issue, so clean the humidity sensor. Overloading the machine or not wringing clothes adequately beforehand can also extend drying times. Avoid excessive loads, and ensure clothes are wrung at a higher speed in your washing machine.
How to fix a Beko B3T6823M2 that does not turn on or start a program?
If your Beko Dryer doesn't turn on or the program won't start, first ensure the power cord is plugged in. Check that the loading door is properly closed. Verify that a program is set and the dryer is not in Pause mode. Also, the child lock may be activated, so turn it off.
What to do if clothes come out damp after drying in my Beko B3T6823M2?
If clothes are damp after drying in your Beko Dryer, it could be due to using an unsuitable program for the laundry type. Check the maintenance labels on the clothes and select a suitable program or use time programs as extra. Clogged fibre filters (interior and exterior) can also cause this, so wash and dry them. The condenser front side might be clogged, requiring cleaning. Avoid overloading the machine, and ensure laundry is adequately wrung before drying.
Why is the drying operation taking too long on my Beko B3T6823M2 Dryer?
If the drying operation of your Beko Dryer is taking too long, it might be due to several reasons. The fibre filters (interior and exterior) could be clogged, so try washing them with warm water and drying them. The condenser front side may also be clogged, requiring cleaning. Ensure that the ventilation grills in front of the machine are not blocked by any objects. Inadequate ventilation in a small installation area can also cause this, so open a door or window. A lime layer on the humidity sensor could be the culprit, so clean the humidity sensor. Avoid overloading the machine, and ensure laundry is adequately wrung before drying.
Why won't my Beko B3T6823M2 turn on?
If your Beko Dryer isn't turning on, first check that the power plug is properly inserted. Also, ensure that the loading door is fully closed. Verify that a program is selected and that the dryer is not in Pause mode. Finally, check if the child lock is activated and, if so, deactivate it.
What to do if my Beko B3T6823M2 fibre filter cleaning icon is lit?
The fibre filter cleaning icon lights up when the fibre filter (interior and exterior) is unclean, or a layer has formed on the fibre filter pores that leads to clogging. Wash the filters with warm water and dry them. It is also possible that the fibre filters are not inserted properly, so insert the interior and exterior filters to their places. If your dryer uses an environmentally-friendly filter cloth, make sure it is installed on the plastic part and placed on the filter housing. Replace the environmentally-friendly filter if the warning symbol is still illuminated after cleaning.
General| Capacity | 8 kg |
|---|---|
| Drying Programs | 15 |
| Dryer type | Heat Pump |
| Number of Programs | 15 |
| Type | Freestanding |
| Color | White |
To Next Page
