EasyManua.ls Logo

Beko BX 109 H - User Manual

Beko BX 109 H
24 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Remote controller
User Manual
BX 109 C BX 109 H BX 112 C
BX 112 H BX 109 AC BX 109 AH
EN FR
COOL SPEED
HEAT TIMER MODE
°C/°F
ON/OFF
SWING
SLEEP
MODE

Table of Contents

Other manuals for Beko BX 109 H

Preview: Installation Manual
Installation Manual88 pages

Questions and Answers

  • G
    Garrett DickersonJul 26, 2025
    Why is my Beko BX 109 H blowing air but not cooling/heating properly?
    • A
      Alyssa PopeJul 26, 2025
      If your Beko Air Conditioner is blowing air, but the cooling or heating isn't effective, several factors could be at play. First, check that the temperature setting is appropriate, ensuring it's lower than the ambient temperature for cooling or higher for heating. A blocked air filter can also reduce efficiency, so clean it thoroughly. Obstructions at the air inlet or outlet should be removed. In very hot rooms, allow extra time for the unit to cool the environment. Ensure doors and windows are closed. If the issue persists, reconfirm the required cooling/heating capacity with your dealer.
  • S
    Sandra WilsonAug 3, 2025
    How to fix a Beko BX 109 H that will not operate?
    • K
      Katelyn WilliamsAug 3, 2025
      If your Beko Air Conditioner won't turn on, check a few things. First, make sure the power switch is on. If there was a power outage, wait for the power supply to return. If the fuse is burnt, have it replaced by a professional. Also, check if a startup delay is set; if so, wait or cancel the setting.
  • W
    Wyatt GrahamAug 15, 2025
    What to do if Beko BX 109 H doesn't start when pressing the ON/OFF button?
    • P
      Paul Daniel MDAug 15, 2025
      If your Beko Air Conditioner doesn’t start when you press the ON/OFF button, it might be because it hasn't been four minutes since it was last switched off; wait four minutes and try again. Also, check if the room temperature is lower than the set temperature in cooling mode or higher than the set temperature in heating mode and reset the setting temperature.

Summary

Precautions

Buttons Description

ON;OFF Button

Turns the unit on or off, clears timer and SLEEP settings.

MODE Button

Selects running modes: AUTO, COOL, DRY, HEAT, FAN. HEAT mode not for cool-only units.

TIMER Button

Sets OFF or ON timer for the unit (0.5-24 hours). Confirms or cancels settings.

HEAT Button

Press this button to enter HEAT mode for the air conditioner.

COOL Button

Press this button to enter COOL mode for the air conditioner.

SPEED Button

Selects fan speed: Low, Mid, High, Auto. Auto speed is not available in Fan mode.

+ & - Buttons

Adjusts temperature setting by 1°C increments within 16°C-32°C range. Not usable in Auto/Fan mode.

°C & °F Button

Switches the temperature display between Celsius (°C) and Fahrenheit (°F).

SWING Button

Activates up/down swing function and can be pressed again to fix the swing position.

SLEEP Button

Activates/deactivates sleep mode. Exits after 10 hours. Not available in FAN/AUTO mode.

Child-lock Function

Activate/deactivate by holding HEAT and MODE buttons for 3 seconds. Indicated by a lock symbol.

Usage Instructions

Fix Batteries

Steps to open cover, insert two new batteries correctly, and close cover.

Auto Operation Mode

Steps to select AUTO mode, fan speed, and turn unit ON/OFF. Temp settings are non-effective.

Cooling;Heating Operation Mode

Steps to select COOL/HEAT mode, set temp (16-32°C), fan speed, and turn unit ON/OFF.

Fan Operation Mode

Steps to select FAN mode, fan speed (Low, Mid, High), and turn unit ON/OFF. Temp settings non-effective.

Drying Operation Mode

Steps to select DRY mode, set temp (16-32°C), and turn unit ON/OFF. Speed settings non-effective.

Beko BX 109 H Specifications

General IconGeneral
Energy Efficiency Class CoolingA
Power Supply220-240V, 50Hz
RefrigerantR410A
Cooling Capacity9000 BTU
Operating Temperature (Cooling)18-43 °C

Related product manuals