Beko CNK321EC0A - Using the Product; Indicator Panel Functions

32 / EN
Refrigerator / User manual
5 Using the product
C
*Optonal: The figures in this user guide are intended as drafts and may not perfectly
match your product. If your product does not comprise the relevant parts, the information
pertains to other models.
5.1. Indicator panel
Indicator panel allows you to set the temperature and control the other functions related to
the product without opening the door of the product. Just press the inscriptions on relevant
buttons for function settings.
1. Power failure/High temperature / error
warning indicator
This indicator ( ) illuminates during power
failure, high temperature failures and error
warnings. During sustained power failures,
the highest temperature that the freezer
compartment reaches will flash on the digital
display. After checking the food located
in the freezer compartment ( ) press the
alarm off button to clear the warning.
Please refer to "remedies advised for
troubleshooting" section on your manual if
you observe that this indicator is illuminated.
2. Energy saving function (display off):
If the product doors are kept closed for
a long time energy saving function is
automatically activated and energy saving
symbol is illuminated. ( )
C
Hgh temperature alarm mode s desgned for customer health. It does not mean
refrgerator have problem.
When energy saving function is activated,
all symbols on the display other than
energy saving symbol will turn off. When
the Energy Saving function is activated,
if any button is pressed or the door is
opened, energy saving function will be
canceled and the symbols on display will
return to normal.
Energy saving function is activated during
delivery from factory and cannot be
canceled.
3.Quick fridge function
The button has two functons. To actvate
or deactvate the quck cool functon press
t brefly. Quck Cool ndcator wll turn off
and the product wll return to ts normal
settngs.( )
C
By pressing 10 (Quick Freeze) and 3 (Quick Fridge) buttons at the same time (3 sec), the unit
of set temperature can be changed Celsius to Fahrenheit and Fahrenheit to Celsius.