EasyManua.ls Logo

Beko LCD panel - Important Safety Instructions; Environmental and Electrical Safety

Beko LCD panel
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4 I
EN
10)Neveroperate
electrical devices close
to water. Operating
such devices, for
example, near a
bathtub, washbasin, kitchen washbasin,
washing basin, wet basement and
swimming pool can cause fire or electric
shock.
• Donotallowyour
TVtogetwet.Never
pour any liquids
onto the TV. Do not
operate your TV if
any solid or liquid
substance enters into it. This can cause
electric shock and your TV may be
damaged. Have it checked immediately
by qualified personnel.
• Keepopenflame
sources(suchas
candles)awayfrom
TV in order to avoid
risk of fire.
11) DO NOT USE
headphones at extremely
high volume levels since
this may cause permanent
loss of hearing.
12) Operate your TV
only in the 220-240V
50-60Hz voltage
range.UsetheAC
power cable supplied
withtheproduct.If
yourTVisagrounded(ClassI)product,
then it must certainly be connected to a
grounded socket.
• The socket into which you plug in the
AC power cable or the adaptor must
be within easy reach.
• Turn off your device with the ON/OFF
button and then unplug it in order to
disconnect it from mains.
Note 1: If you would like to operate
your television by means of the
lighter cable (*) in a car, then use
the cable supplied with the product
(**) or another cable with equivalent
properties. Using an unsuitable cable
may damage your appliance.
(*): Lighter cable input is optional and is
not available on all models.
(**) : Cable is an option. It is not supplied
with every model. If your product
does not contain a cable, you can
use a cable approved according to
UL 2089.
Note 2: If your device has an adaptor,
then use the adaptor and AC power
cable supplied with your product. Do
not use defective sockets. Make sure
that the plug is firmly inserted into
the socket. If the plug remains loose,
then it can cause fire due to arching.
Refer to an electrician to have your
socket replaced.
13) Make sure that the power
cable is not stepped
on and that there is no
bending at the plug
sections, plug heads and
device output point.
14) Useonlytheadd-ons/accessories
specified by the manufacturer.
15)Useonlytogetherwith
the carts, bases, tripods,
brackets or stands specified
by the manufacturer or sold
along with the product.
When using a cart, pay
attention that it won’t
overturn while carrying the
cart/devicecombinationand
cause injuries. The device
must be fixed to the floor
or wall as indicated in the installation
instructions in order to avoid any possible
damages. Place your device on a level
surface.

Related product manuals