What to do if my Beko WTE 6511 BS Washer does not drain water?
If your Beko Washer isn't draining water, the drain hose might be clogged or twisted; inspect and clean or flatten it. Also, the pump filter could be clogged, so clean the pump filter to resolve the issue.
How to open the loading door of my Beko Washer?
If the loading door of your Beko Washer won't open, it could be due to several reasons. If there is water inside, the door lock might be activated; try running the Pump or Spin programme to drain the water. If the machine is heating or spinning, wait until the programme completes. Check if the child lock is engaged and wait a couple of minutes after the programme ends for it to deactivate. The door might also be stuck due to pressure; try pushing and pulling the door to release it.
Why is my Beko WTE 6511 BS leaking water from the bottom?
If you notice water leaking from the bottom of your Beko Washer, the water drain hose might be clogged or twisted, so clean or flatten it. Alternatively, the pump filter could be clogged; in that case, clean the pump filter.
What to do if Beko WTE 6511 BS Washer enters standby mode or does not take in water?
If your Beko Washer enters standby mode or doesn't take in water, check the following: 1. Ensure the tap is turned on. 2. Make sure the water inlet hose isn't bent; flatten it if it is. 3. Clean the water inlet filter if it's clogged. 4. Ensure the loading door is closed properly. 5. Verify the water connection and ensure water supply isn't cut off; if it was cut off, press the Start/Pause key after the water is restored.
What to do if Beko WTE 6511 BS program does not start after closing the door?
If the program on your Beko Washer doesn't start after closing the door, make sure you've pressed the Start / Pause / Cancel button. Also, if you've loaded too much laundry, it may be difficult to close the door properly; reduce the amount of laundry and ensure the door is closed correctly.
Why does my Beko WTE 6511 BS Washer not rinse well?
If your Beko Washer doesn’t rinse well, the amount, brand, and storage conditions of the detergent may be inappropriate. Use a detergent suitable for washing machines and laundry, and store it properly. Ensure detergent is put in the correct compartment. Also, check the pump filter and drain hose for clogs or folds.
Why is my Beko WTE 6511 BS Washer vibrating or making noise?
If your Beko Washer is vibrating or making noise, several factors could be the cause. First, ensure the machine is level by adjusting the feet. Remove the transportation safety bolts if you haven't already. An unbalanced load can also cause this issue; try adding more laundry or redistributing the existing load evenly. Check that the machine isn't leaning against anything. Finally, inspect the pump filter for any hard objects.
Why is there detergent residue in my Beko WTE 6511 BS detergent drawer?
If you find detergent residue in the detergent drawer of your Beko Washer, ensure the drawer is dry before adding detergent. The detergent itself may have gotten damp, so keep detergents stored properly. Low water pressure could also be a factor; check the water pressure. Inspect the holes of the detergent compartment for blockages and clean if necessary. Do not mix the softener with detergent and wash and clean the dispenser with hot water.
Why does laundry turn gray after washing in my Beko Washer?
If your laundry turns gray after washing in your Beko Washer, it could be due to insufficient detergent used over time. Make sure to use the recommended amount of detergent appropriate for water hardness and the laundry. Also, washing at low temperatures for a long time can cause this, so select the proper temperature. Using insufficient detergent with hard water can also cause graying.
Why do stains persist after washing in my Beko WTE 6511 BS Washer?
If stains persist or your laundry isn't whitened after washing in your Beko Washer, ensure you are using the recommended amount of detergent appropriate for water hardness and the laundry. Avoid overloading the machine and select the proper programme and temperature for the laundry. Use original detergent appropriate for the machine, and put the detergent in the correct compartment. Do not mix the bleaching agent and the detergent with each other.
Safety measures to prevent physical harm and property damage.
Guidelines to ensure children's safety around the appliance.
Warnings about hot surfaces, particularly the loading door glass.
Information on WEEE/RoHS directives and packaging recycling.
Specifies the product's domestic use and operational limits.
Lists comprehensive technical data, efficiency, and dimensions.
Requirements for installing the washing machine correctly.
Guidance on choosing a location, removing packaging, and transport locks.
Instructions for correctly attaching the drain hose.
Requirements for safe electrical connection to a grounded outlet.
Steps to follow before the first wash, including drum cleaning.
Guidance on sorting, preparing laundry items, and checking pockets.
Recommendations for economical and eco-friendly washing.
Instructions on how to load laundry and understand capacity limits.
Explanation of the control panel buttons, indicators, and display.
Steps to prepare the machine before starting a wash cycle.
How to choose the appropriate wash programme and temperature.
Instructions for cleaning the detergent dispenser and siphon.
How to clean the drum and the loading door seal.
Guide to cleaning exterior surfaces and water intake filters.
A comprehensive list of problems and their solutions for the washing machine.
Troubleshooting for poor rinsing and detergent-related problems.
To Next Page
General
