What to do if my Beko Washer doesn't drain water?
If your Beko Washer isn't draining water, it might be due to: * A clogged or twisted water drain hose. Clean or flatten the hose. * A clogged pump filter. Clean the pump filter.
How to fix a Beko Washer that won't start?
If your Beko Washer program doesn't start after closing the door, it could be because: * The Start / Pause / Cancel button was not pressed. Press the Start / Pause / Cancel button. * It may be difficult to close the loading door in case of excessive loading. Reduce the amount of laundry and make sure that the loading door is closed properly.
What to do if my Beko Washer door won't open?
If the loading door of your Beko Washer cannot be opened: * The door lock is activated because of the water level in the machine. Drain the water by running the Pump or Spin programme. * The machine is heating up the water or it is at the spinning cycle. Wait until the programme completes. * Child lock is engaged. Wait for a couple of minutes for deactivation of the door lock. * The loading door may be stuck because of the pressure it is subjected to. Grab the handle and push and pull the loading door to release and open it.
Why is my Beko Washer not spinning?
Your Beko Washer might not switch to the spinning step because: * There might be unbalanced load in the machine. Automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the drum. * The machine will not spin if water is not drained completely. Check the filter and the draining hose. * Excessive foam might have occurred and automatic foam absorption system might have been activated due to too much detergent usage. Use recommended amount of detergent.
Why is my Beko WTG620M1W Washer vibrating so much?
Your Beko Washer might be vibrating or making noise due to several reasons: * The machine might be standing unbalanced. Adjust the feet to level the machine. * A hard substance might have entered into the pump filter. Clean the pump filter. * Transportation safety bolts are not removed. Remove the transportation safety bolts. * Laundry quantity in the machine might be too little. Add more laundry to the machine. * The machine might be overloaded with laundry. Take out some of the laundry or distribute the load by hand to balance it. * The machine might be leaning on a rigid item. Make sure that the machine is not leaning on anything.
Why is my Beko WTG620M1W Washer immediately discharging water?
Your Beko Washer might be directly discharging the water it takes in because the draining hose might not be at adequate height. Connect the water draining hose as described in the operation manual.
Why is my Beko WTG620M1W Washer producing too much foam?
If too much foam forms in your Beko Washer, it could be caused by: * Improper detergents for the washing machine are being used. Use detergents appropriate for the washing machine. * Excessive amount of detergent is used. Use only sufficient amount of detergent. * Detergent was stored under improper conditions. Store detergent in a closed and dry location. Do not store in excessively hot places. * Some meshed laundry such as tulle may foam too much because of their texture. Use smaller amounts of detergent for this type of item. * Detergent is put in the wrong compartment. Put the detergent in the correct compartment. * Softener is being taken early. There may be problem in the valves or in the detergent dispenser. Call the Authorized Service Agent.
Why is my Beko Washer's washing performance poor with stains persisting?
If the washing performance of your Beko Washer is poor, and stains persist or the laundry is not whitened, consider the following: * Insufficient amount of detergent is used. Use the recommended amount of detergent appropriate for water hardness and the laundry. * Excessive laundry was loaded in. Do not load the machine in excess. Load with amounts recommended in the 'Programme and consumption table'. * Wrong programme and temperature were selected. Select the proper programme and temperature for the laundry to be washed. * Wrong type of detergent is used. Use original detergent appropriate for the machine. * Too much detergent is used. Put the detergent in the correct compartment. Do not mix the bleaching agent and the detergent with each other.
Why is my Beko WTG620M1W's programme time not counting down?
If the programme time on your Beko Washer is not counting down (on models with a display), it could be because: * The timer may stop during water intake. The timer indicator will not countdown until the machine takes in adequate amount of water. The machine will wait until there is sufficient amount of water to avoid poor washing results due to lack of water. Timer indicator will resume countdown after this. * The timer may stop during the heating step. The timer indicator will not countdown until the machine reaches the selected temperature. * The timer may stop during the spinning step. The automatic unbalanced load detection system might be activated due to the unbalanced distribution of the laundry in the drum.
Why does my Beko WTG620M1W smell unpleasantly after washing?
Odours and bacteria layers are formed on the drum of your Beko Washer as a result of continuous washing at lower temperatures and/or in short programmes. Leave the detergent drawer as well as the loading door of the machine ajar after each washing. Thus, a humid environment favorable for bacteria cannot occur in the machine.
Guidelines for preventing injuries and material damage related to product placement, usage, and electrical safety.
Precautions for safe use by children, including supervision and storage of hazardous materials.
Instructions on proper electrical connection, grounding, and avoiding shock hazards.
Warning about hot surfaces, particularly the loading door glass during operation.
Information on WEEE directive, recycling, and proper disposal of packaging materials.
Defines the product's purpose, limitations, and expected service life.
Visual identification and description of the main components of the washing machine.
List of items included in the product packaging, with their corresponding numbers.
Detailed technical data including energy efficiency, consumption, dimensions, and capacity.
Recommendations for choosing a suitable and safe location for the washing machine.
Instructions on how to safely remove transit packaging and securing elements.
Step-by-step guide to removing safety bolts to prevent damage during operation.
Procedures for connecting the appliance to the water tap, including pressure requirements.
Instructions for correctly attaching the drain hose to the waste water outlet.
Guidance on leveling the machine using its adjustable feet for stability and quiet operation.
Details on connecting the washing machine to the power supply, including fuse and grounding requirements.
Steps to prepare the machine for its first wash cycle, including drum cleaning.
Guidelines for sorting laundry by fabric type, color, and soiling level.
Tips on preparing clothes, such as removing items from pockets and securing zippers.
Recommendations for efficient and eco-friendly washing practices.
Instructions on how to properly load the washing machine drum without overpacking.
Information on respecting the maximum load capacity for optimal washing results.
Guidance on selecting, measuring, and adding detergents and softeners to the correct compartments.
Advice on selecting programs and conditions for optimal washing performance and efficiency.
Explanation of the washing machine's control panel buttons, knobs, and indicators.
Steps to take before starting a wash cycle, including water and power connections.
How to choose the appropriate wash program based on laundry type and soiling.
Reference table detailing wash programs, load capacities, durations, and consumption values.
Description of primary wash programs like Cottons, Synthetics, and Hand Wash.
Overview of special programs such as Cottons Eco, Daily Quick, and Down Wear.
Details on specific programs like Rinse and Spin+Drain for tailored washing needs.
How to adjust the spin speed for different types of laundry and desired dryness.
Instructions on setting a delayed start for the wash cycle.
Procedure for initiating the selected wash cycle.
How to activate and deactivate the child lock to prevent unintended operation.
How to track the progress of a running wash cycle using indicators.
Explanation of the door lock system and conditions for opening the loading door.
How to pause the machine and modify settings or add/remove laundry during a cycle.
Steps to cancel an ongoing wash cycle and select a new one.
What to do when the wash cycle is completed, including switching off the machine.
Information on the machine's automatic energy-saving mode and pause functionality.
Instructions for removing and cleaning the detergent drawer and siphon for optimal performance.
Procedures for cleaning the washing machine drum and door bellows to prevent stains and residue.
How to clean the exterior of the appliance and its control panel safely.
Steps for locating, removing, and cleaning the water inlet filters to ensure proper water flow.
Guidance on draining residual water and cleaning the pump filter to prevent clogs and ensure smooth operation.
Solutions for problems related to starting the program or opening/closing the loading door.
Troubleshooting steps for issues with water not entering or draining from the machine.
Causes and solutions for excessive noise or vibration during operation.
Addressing problems like poor cleaning, fading, stiff laundry, or unpleasant odors.
Resolving issues with program countdown, unbalanced loads, or the machine not spinning.
Solutions for excessive foam formation or laundry remaining wet at the end of the cycle.
Details on what the standard manufacturer's guarantee covers and what it does not.
Information on how repairs are handled, key conditions, and notes for domestic use.
Information regarding product replacements and policies for extended guarantee services.
Explanation of potential charges for service calls and the conditions for guarantee validity.
Steps required to activate the 10-year guarantee for ProSmart Inverter Motors.
Terms and conditions specific to the ProSmart Inverter Motor guarantee, including labour charges.
How to contact Beko for service, product advice, and details for UK and Republic of Ireland.
Guidance on registering your product and finding model-specific information.
General| Load Capacity | 6 kg |
|---|---|
| Spin Speed | 1200 rpm |
| Energy Rating | A+++ |
| Noise Level (Spin) | 77 dB |
| Number of Programs | 15 |
| Weight | 55 kg |
| Dimensions | 84 cm x 60 cm x 44 cm |
To Next Page
