How to fix water leaking from the bottom of my Beko Washer?
If you see water leaking from the bottom of your Beko washing machine, the water drain hose might be clogged or twisted. Clean or flatten the hose to resolve this. Another possible cause is a clogged pump filter, so clean the pump filter as well.
What to do if my Beko WTG841B1W does not start after closing the door?
If your Beko washer programme doesn't start after closing the door, make sure you've pressed the Start / Pause / Cancel button. Also, if you've loaded too much laundry, it may be difficult to close the loading door. Reduce the amount of laundry and ensure the door is properly closed.
Why does my Beko WTG841B1W it does not rinse well?
If your Beko washer isn't rinsing well, the amount, brand, and storage conditions of the detergent used may be inappropriate. Use a detergent suitable for washing machines and laundry, stored correctly. Also, ensure detergent is placed in the correct compartment; putting it in the prewash compartment without selecting a prewash cycle can cause issues. Check the filter and the drain hose for any blockages or folds.
What to do if my Beko WTG841B1W Washer washing performance is poor and laundry turns grey?
If your laundry turns grey after washing in your Beko washer, it could be due to insufficient detergent used over time, washing at low temperatures for too long, using too little detergent with hard water, or using too much detergent. Ensure you use the recommended amount of detergent appropriate for water hardness and the laundry, and select the correct temperature for the load.
Why is there too much foam in my Beko WTG841B1W?
Too much foam in your Beko washer can be caused by using improper detergents, using too much detergent, or storing detergent improperly. Also, certain meshed laundry items like tulle can create excessive foam. Ensure you're using the right detergent in the correct amount, stored in a closed, dry location. Put the detergent in the correct compartment. For meshed laundry, use less detergent. Also, softener is being taken early, which indicates there may be a problem in the valves or in the detergent dispenser.
What to do if my Beko WTG841B1W Washer washing performance is poor and stains persist?
If stains persist or laundry isn't whitened after washing in your Beko washer, you might be using too little detergent, overloading the machine, selecting the wrong programme and temperature, or using the wrong type of detergent. Make sure to use the recommended amount of detergent, avoid overloading, choose the correct settings, and use a detergent appropriate for the machine. Also, if you use too much detergent, put the detergent in the correct compartment and do not mix the bleaching agent and the detergent with each other.
Why does my Beko WTG841B1W Washer enter standby mode or not take in water?
Your Beko washer might enter standby mode or fail to take in water for several reasons. Check if the tap is turned off and turn it on. Ensure the water inlet hose isn't bent; flatten it if it is. Also, the water inlet filter may be clogged, so clean it. Confirm that the loading door is fully closed. Finally, verify the water connection and ensure the water supply isn't cut off. If it was cut off, press the Start/Pause key after the water is restored to resume the operation.
Why does my Beko WTG841B1W laundry became stiff after washing?
Laundry can become stiff after washing in your Beko washer if you're using too little detergent for the water hardness. Use an appropriate amount of detergent. Also, make sure you're putting detergent in the correct compartment; if it's in the prewash compartment when a prewash cycle isn't selected, it can interfere with rinsing. Do not mix the softener with detergent. Wash and clean the dispenser with hot water.
What to do if my Beko WTG841B1W washing performance is poor and clothes smell unpleasantly?
If clothes smell unpleasant after washing in your Beko washer, odours and bacteria layers may have formed on the drum due to continuous washing at lower temperatures and/or in short programmes. Leave the detergent drawer as well as the loading door of the machine ajar after each washing. This prevents a humid environment favorable for bacteria from forming in the machine.
Why does my Beko WTG841B1W laundry remains wet at the end of the programme?
If laundry remains wet after a Beko washer programme, it may be due to excessive foam activating the automatic foam absorption system because too much detergent was used. Use the recommended amount of detergent.
To Next Page
General
