Why does my Beko WTG841B1W Washer directly discharge water?
If your Beko washer immediately discharges the water it takes in, it's likely that the draining hose isn't at the correct height. Connect the water draining hose as described in the operation manual.
What to do if my Beko WTG841B1W programme cannot be started or selected?
If a programme cannot be started or selected on your Beko washer, it may have switched to self-protection mode due to a supply problem like line voltage or water pressure. To cancel the current programme, turn the Programme Selection knob to select another programme.
Why does my Beko Washer laundry not smell like softener?
If your laundry doesn't smell like softener after washing in your Beko washer, it could be because the detergent is put in the wrong compartment. If detergent is put in the prewash compartment although prewash cycle is not selected, machine can take this detergent during rinsing or softener step. Wash and clean the dispenser with hot water. Put the detergent in the correct compartment. Also, make sure you're not mixing the softener with detergent. Wash and clean the dispenser with hot water.
What to do if my Beko WTG841B1W Washer stopped shortly after the programme started?
If your Beko washer stopped temporarily shortly after the programme started, it might be due to low voltage. The machine will resume running when the voltage restores to the normal level.
To Next Page
General
